Best servo

You're on Page 1 of 2
Go to
  • I am looking for peoples opinion on the best stering servo for 1/10 touring sedans. Assumeing price is no issue
  • I use the Hitec 925. Good speed and price.
  • I use a airtronics 94357 which is the 94360 without the heatsinked case and I love it..07 speed and 130oz torque, who could ask for more.
  • 94357
  • how about the
    Futaba s9451 or the Hitec HSC-5996TG
  • There is no best.
  • 94758
  • I would have to agree with the Airtronics servos mentioned, but I use JR servos.. z9000s. .06 and 128oz in. The z8800s is also a great servo but just a hair slower at .08. Not like you'll notice though.
  • I have a 8800s also and its another great servo.
  • Some times people dont like at fastness, 100oz and .10 speed is a good starting point

    Airtronics 94357 125oz in at .07
    Futaba S9402 111oz in at .10
    Hitec HS-925MG 106oz in at .11
    Hitec HS-5925MG 128oz in at .08
    Hitec HS-5975MG 109oz in at .10
    JR DS8450 98oz in at .08
    KO PDS-2343 111oz in at .08

    Ill be getting the Ko 2343 and 2344 for my servos, 2343 for stock truck, gas truck, touring car, and 8th scale throttle/brake and the 2344 for 8th steering

    Hope this helps
  • Quote: Ill be getting the Ko 2343 and 2344 for my servos, 2343 for stock truck, gas truck, touring car, and 8th scale throttle/brake and the 2344 for 8th steering

    Hope this helps
    Personally I like these two servos the best. Had the top Hi-tech, went with a KO, and dont even plan on going back..
  • The reason I ask is Im looking for a new servo to match up with my futaba 3PK HRS system, (just have a cheapy know). I have not been in the hobby long and a fellow racer sugested the futaba s9451 but I dont know the differnce between the brands so I ask you guys
  • The futaba 9550 is good if you need more space for your electronics, doesn't quite have the stats of some of the others though. From memory I think it is 98oz and 0.11 but its still a good servo and its what I use.
  • Alot of our locals are running the Futaba 9550. Digital, .11 sec, 83 oz/in torque. Very nice for mounting and good enough speed and torque for carpet foams.
  • Hitec servos are really good and tough. Digital, ball bearings, tinanium gears, coreless, and heatsink are all provided on the top models.

Similar Threads