ICON RC
 

Welcome to ICON RC if you have any question about there products or need help with set ups feel free to post.
The owner Andrea Efficace is on top of his game with his products feel free to stop by his web site @https://www.iconrc.it
He will answer all your question about his company. And the after market parts that they have.

Thanks George!
 

Hi everyone,i'm Andrea owner of ICON RC,my company produces some optional parts for r/c competition cars,actually our focus is on the Team Associated TC7.2/7.1 touring platform,some of you have already had the chance to try some ICON products and i sincerely hope you are satisfied with our work because we pushed by an extreme passion and dedication for our Racing hobby.

Well,if you have any questions or curiosities about ICON RC products i'm here to answer you and i hope to satisfy every request.

Andrea
ICON RC

https://cimg5.ibsrv.net/gimg/www.rct...e9d7bee326.jpg

Been using the aluminum outdrives since a while and they are holding up pretty well, 6 races and still no sign of wear. Aluminum chassis is pretty good as well, AE one can be a bit too stiff for some surfaces, ICON's one is a compromise when carbon is too soft and AE aluminum is too stiff.

I remember Icon Racing from back in the Day... (sarcasm) from around 2010:lol: (I know its a differnt Company now)

https://cimg5.ibsrv.net/gimg/www.rct...2656b72ea2.jpg

Low profile towers
 

I believe you need either the Axon shocks or some other Ultra Low Profile shocks as the stock shocks are just Low Profile, not Ultra Low Profile.

Installed low profile tower/shocks kit, hopefully i can test it next week
https://cimg5.ibsrv.net/gimg/www.rct...a566d2c168.jpg
https://cimg6.ibsrv.net/gimg/www.rct...9fb194bf77.jpg

Aluminum outdrives Version 2

What's new in V2:

Anti-friction treatment improved by 20% for less blades wear

New CAD design improves strength by 15%

Machining tolerances improved by 15%

ICON RC Alu spool outdrives for ae TC7.2/7.1 to be used with original ASC31238 blades.

https://cimg0.ibsrv.net/gimg/www.rct...f18e53eab5.jpg

IconRC Aluminum outdrives V2
*Made in Italy

*Swiss 7075-T6 Ergal alloy

*60% weight saving compared to original steel outdrives, total weight 3.5g

*laser engraved ICON RC logo

*Hard PTFE coating with a thickness of 50μ.

*Machined from a single aluminum bar for maximum precision

*Pack of 2 pcs.

https://www.iconrc.it/products/bicch...161c0e75&_ss=r

Nice...