OVA

iTrader: (86)

yes I did the trig and I though of doing that shimming thing in the rear of the Zero deg block . I was afraid getting the 4 deg total ,the block might get push down too far will scrape bottom

Raman

iTrader: (94)

Very nice Erik 👍

kometkamerat

Ran with 4 degrees today, no scrape whatsoever with 5mm ground clearance.

K.

OVA

iTrader: (86)

Are you speaking of shimming or 4 deg block installed?
there is the difference .

kometkamerat

4 deg M07 block and M07 C-hubs.

Raman

iTrader: (94)

Satoshi Maezumi set up.. basics are legible.. anyone read Japenese?

photeckk

iTrader: (24)

What are the shock upgrade options for the this car?
Also, what other upgrades do you guys recommend? I’m planning on running the car outdoors. Thanks

anthonyscardina

iTrader: (12)

I put the TRF dampers on mine, I don't have the box handy at this exact moment but I can look tonight, the mighty Google says 42273 is the part number. I also have carbon towers and a sway bar kit, both fit either M07 or M08, as well as M07 caster blocks as they're a one piece design and are more durable.

As for running this car outdoors, an M07 might be the best upgrade, lol. I ran mine for some parking lot races over the summer and it was very hit or miss. Some days it was fast as hell, and others it was a total hand full just to keep it going the right direction. With actual setup work it might be fine, but that's not an area I excel in.

Raman

iTrader: (94)

New body set already announced for M chassis Way to go Tamiya

51658 Ford Escort MkII Rally Body Parts Set

This is interesting

54995 M-Chassis 60D Super Radial Tires (Soft,2pcs)

54999 M-Chassis 60D Super Radial Tires (Hard,2pcs)

I wonder if it’s a new compound or a new tyre entirely

Red141

iTrader: (18)

Wow. Getting this body even before getting my chassis. I'm still holding out for the M08R.

St. George

iTrader: (7)

Does anyone know if the Porsche Turbo RSR Type 934 shell will work with an M-08 chassis?

https://www.ebay.com/itm/Tamiya-RC-B...8AAOSw~sdcGDAH

Raman

iTrader: (94)

Wheelbase is 230..

M08 is 210, 225, 239. So with 225 you can make it work. Issue is width.. as back end of the 934 is wide, so you’ll have to come up with some wide wheels

OVA

iTrader: (86)

This bodies is design for short wheel base 1/10 scale with stock 26mm front and 30mm rear wheels ..The mini is already total 20mm too narrow suspension before the mounting the wheels

St. George

iTrader: (7)

That's too bad, a body like that would be perfect for this platform.

OVA

iTrader: (86)

I see one online But it is the short WB 210mm