10Likes2019 MILE HIGH INDOOR CHAMPS - 5280 Raceway - April 11-14 2019
02-25-2019, 03:33 PM
#18
Tech Elite
Join Date: Dec 2005
Location: 5280 Raceway. Denver's finest RC facility
Posts: 4,780
I am very pleased to announce that we have decided to add GT12 as a class to the Mile High Indoor Champs. Look for registration for this class to open up tomorrow. Rules are as follows:
Any 1/12 pan car chassis,
21.5 ROAR approved motors,
Roar approved blinky speedos.
Roar approved 1s lipo
BYO Purple stripe tires (CRC/BSR or JFT only)
Must run a GT12 body. Bodies must be cut on the molded cut lines, no lowering of bodies permitted,
3mm ride height minimum,
730 grams minimum weight.
Any 1/12 pan car chassis,
21.5 ROAR approved motors,
Roar approved blinky speedos.
Roar approved 1s lipo
BYO Purple stripe tires (CRC/BSR or JFT only)
Must run a GT12 body. Bodies must be cut on the molded cut lines, no lowering of bodies permitted,
3mm ride height minimum,
730 grams minimum weight.
Last edited by al dente; 02-27-2019 at 08:16 PM.
02-27-2019, 08:17 PM
#19
Tech Elite
Join Date: Dec 2005
Location: 5280 Raceway. Denver's finest RC facility
Posts: 4,780
I am very pleased to announce that we have decided to add GT12 as a class to the Mile High Indoor Champs. Look for registration for this class to open up tomorrow. Rules are as follows:
Any 1/12 pan car chassis,
21.5 ROAR approved motors,
Roar approved blinky speedos.
Roar approved 1s lipo
BYO Purple stripe tires (CRC/BSR or JFT only)
Must run a GT12 body. Bodies must be cut on the molded cut lines, no lowering of bodies permitted,
3mm ride height minimum,
730 grams minimum weight.
Any 1/12 pan car chassis,
21.5 ROAR approved motors,
Roar approved blinky speedos.
Roar approved 1s lipo
BYO Purple stripe tires (CRC/BSR or JFT only)
Must run a GT12 body. Bodies must be cut on the molded cut lines, no lowering of bodies permitted,
3mm ride height minimum,
730 grams minimum weight.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
