R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Electric On-Road (https://www.rctech.net/forum/electric-road-2/)
-   -   GEAR RATIO (https://www.rctech.net/forum/electric-road/1026367-gear-ratio.html)

JOHNATHANWALKER 09-19-2018 09:15 AM

GEAR RATIO
 
HELLO I WAS WONDERING IF ANYONE CAN HELP ME I AM RUNNING A XRAY T4 2018 AND I AM USING A R1 ESC WITH R1 17.5 TURN MOTOR AND I NEED A FINAL GEAR RATIO SO I KNOW WHAT PINION TO RUN. I AM USING THE STOCK SPURE 84 TOUTH 48 PITCH I NEED HELP WITHTHE PINION TO GET A GENERAL START FROM. I AM RUNNING IT ON SPEEDWORLD RACE WAY OUT DOOR ON ROAD TRACK. ANY HELP IS VERY APRCIATED.

Marcos.J 09-19-2018 09:23 AM


Originally Posted by JOHNATHANWALKER (Post 15302477)
HELLO I WAS WONDERING IF ANYONE CAN HELP ME I AM RUNNING A XRAY T4 2018 AND I AM USING A R1 ESC WITH R1 17.5 TURN MOTOR AND I NEED A FINAL GEAR RATIO SO I KNOW WHAT PINION TO RUN. I AM USING THE STOCK SPURE 84 TOUTH 48 PITCH I NEED HELP WITHTHE PINION TO GET A GENERAL START FROM. I AM RUNNING IT ON SPEEDWORLD RACE WAY OUT DOOR ON ROAD TRACK. ANY HELP IS VERY APRCIATED.

your best bet would be to ask the ones that race at the track

Nerobro 09-19-2018 09:25 AM

All caps comes across as yelling.

A reasonable start, I think, would be 45 pinion, 100 spur. The example I found was for the tamiya track. 4.22 overall ratio

http://site.petitrc.com/reglages/xra...USA2018052427/

Billy Kelly 09-19-2018 09:39 AM







might help find combination. Pay no attention to the highlighted red. Just what I was trying at completely different track. But the chart helps.

Billy Kelly 09-19-2018 09:45 AM

https://cimg9.ibsrv.net/gimg/www.rct...7ebd49830e.png
Should help with combination. Though some at the track will have better ideas

RoyB 09-19-2018 10:27 AM

Speedworld has a Facebook page. They answer questions pretty quickly.

https://www.facebook.com/SpeedworldRaceway100/

KE4PJO 09-19-2018 10:31 AM


Originally Posted by Marcos.J (Post 15302482)
your best bet would be to ask the ones that race at the track

Always the best plan...


casrcr 09-20-2018 12:03 PM

[QUOTE=JOHNATHANWALKER;15302477]HELLO I WAS WONDERING IF ANYONE CAN HELP ME I AM RUNNING A XRAY T4 2018 AND I AM USING A R1 ESC WITH R1 17.5 TURN MOTOR AND I NEED A FINAL GEAR RATIO SO I KNOW WHAT PINION TO RUN. I AM USING THE STOCK SPURE 84 TOUTH 48 PITCH I NEED HELP WITHTHE PINION TO GET A GENERAL START FROM. I AM RUNNING IT ON SPEEDWORLD RACE WAY OUT DOOR ON ROAD TRACK. ANY HELP IS VERY APRCIATED.[/QUOTE. Start with a 38t pinion. Finals out @ 4.2


All times are GMT -7. It is currently 01:31 PM.

Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.