XRAY T4'19 SPEC
#121
my t4'19 arrived today
#122
Tech Elite
iTrader: (15)
If you are looking for a T4 19
Michael's RC Hobbies in Orlando, Fl has 1 US version and 2 with Carbon Chassis
www.michaelsrchobbies.com
407-634-8909
Michael's RC Hobbies in Orlando, Fl has 1 US version and 2 with Carbon Chassis
www.michaelsrchobbies.com
407-634-8909
#123
A Main has them for 589.00
#124
Tech Initiate
stromer hobbies has them..
#126
Tech Adept
Here it is 2019
A friend helps to set this up. My first Xray T4
#127
Hi guys, I just got my T4 19, this is my first Xray TC and I ve been out of EP Tc for about 4 years now. Any links for a building tips? What other parts that are a must to have (Options or spare)? I ll be racing this car in 13.5t blinky and boosted class, mostly outdoor tarmac.
Thanks in advance.
Thanks in advance.
#128
Suspended
Hi guys, I just got my T4 19, this is my first Xray TC and I ve been out of EP Tc for about 4 years now. Any links for a building tips? What other parts that are a must to have (Options or spare)? I ll be racing this car in 13.5t blinky and boosted class, mostly outdoor tarmac.
Thanks in advance.
Thanks in advance.
1-Carbon Parts
2-Suspension
3-Solid Axle and Differential
4-Bulkheads & Drivetrain
5-Driveshaft (ECS & CVD)
6-Front & Rear Suspension
7-Tweak
8-Anti-Roll Bar
9-Battery Fix (OPTIONAL)
10-Bumper & Body
11-Shocks
12-Steering
#129
These are a little dated, but should still apply for the most part.
1-Carbon Parts
2-Suspension
3-Solid Axle and Differential
4-Bulkheads & Drivetrain
5-Driveshaft (ECS & CVD)
6-Front & Rear Suspension
7-Tweak
8-Anti-Roll Bar
9-Battery Fix (OPTIONAL)
10-Bumper & Body
11-Shocks
12-Steering
Building the new ULP Shock w/ Zero Rebound by Dominic Quek
1-Carbon Parts
2-Suspension
3-Solid Axle and Differential
4-Bulkheads & Drivetrain
5-Driveshaft (ECS & CVD)
6-Front & Rear Suspension
7-Tweak
8-Anti-Roll Bar
9-Battery Fix (OPTIONAL)
10-Bumper & Body
11-Shocks
12-Steering
Building the new ULP Shock w/ Zero Rebound by Dominic Quek
#130
Tech Initiate
makes it look easy
#132
I m setting up my car following the basic asphalt set up. On the motor mount plate there are 3 options, ALU STAND, NUT, NONE. So when NONE is selected, does it mean that the M3 screw and nut (as per manual) is not used at all?
#135
for your information
the t4´19 weights 478g out of the box
my mugen mtc1 was around 520g
xray ist ready for the first race, box stock with low profile servo, 6000mah ip lipo (289g ), 30mm fan and pf speed 6 lw it weights 1329g
so for our race rules here in europe i have to add 25g
the t4´19 weights 478g out of the box
my mugen mtc1 was around 520g
xray ist ready for the first race, box stock with low profile servo, 6000mah ip lipo (289g ), 30mm fan and pf speed 6 lw it weights 1329g
so for our race rules here in europe i have to add 25g