R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Reply
 
Thread Tools Search this Thread
Old 06-26-2008, 11:07 AM   #1081
Tech Champion
 
MikeR's Avatar
 
Join Date: Aug 2001
Location: Irvine, CA
Posts: 5,044
Trader Rating: 15 (100%+)
Default

Who carries the parts in the US, specifically the steering parts? Google is bringing up Kenon RC but they don't list any parts...

Thx,

Mike
__________________
www.exotekracing.com ☆ASSOCIATED☆DURANGO☆HPI☆HB RACING☆KYOSHO☆LOSI/TLR☆SERPENT☆TAMIYA☆TEKNO☆XRAY☆

A picture with your post, when trouble shooting, will probably get more rctech help than without...
MikeR is offline   Reply With Quote
Old 06-26-2008, 11:10 AM   #1082
Tech Master
 
yokemad's Avatar
 
Join Date: Apr 2007
Posts: 1,150
Default

Quote:
Originally Posted by yokemad View Post
Hi Guys
I've got the red scythe as a second car next to my Mi3
I usually put the car on setup board to sort out Tweak, I've tried that with Scythe but m3 screw heads touches to setup board before the chassis because of that it plays left to right on setup board behaves like its tweaked ...
Have you guys have that type of problem?
what you suggest me to do?
Thanx in advance
Up up

try racing11.net mate
yokemad is offline   Reply With Quote
Old 06-26-2008, 11:28 AM   #1083
Tech Master
 
Join Date: Sep 2007
Location: Helmond
Posts: 1,544
Default

I put 2 blocks of my Hudy setup set under it.
Between the weels.
__________________
http://www.mikky32.com
Tekin RS pro
TOP racing Photon
Tekin Redline 10,5
Protoform LTC-R
mikky32 is offline   Reply With Quote
Old 06-26-2008, 12:20 PM   #1084
Tech Elite
 
odpurple's Avatar
 
Join Date: Dec 2002
Location: San Francisco
Posts: 2,192
Default

Quote:
Originally Posted by MikeR View Post
Who carries the parts in the US, specifically the steering parts? Google is bringing up Kenon RC but they don't list any parts...

Thx,

Mike

TOP Racing USA [email protected]

Ampdraw Hobbies www.ampdraw.com
__________________
TOP Racing USA--OD Racing--Novak--Power Push--J Spec
odpurple is offline   Reply With Quote
Old 06-26-2008, 12:56 PM   #1085
Tech Champion
 
MikeR's Avatar
 
Join Date: Aug 2001
Location: Irvine, CA
Posts: 5,044
Trader Rating: 15 (100%+)
Default

Thanks guys!
__________________
www.exotekracing.com ☆ASSOCIATED☆DURANGO☆HPI☆HB RACING☆KYOSHO☆LOSI/TLR☆SERPENT☆TAMIYA☆TEKNO☆XRAY☆

A picture with your post, when trouble shooting, will probably get more rctech help than without...
MikeR is offline   Reply With Quote
Old 06-27-2008, 12:26 PM   #1086
Tech Elite
 
razzor's Avatar
 
Join Date: Aug 2005
Location: Durban, South Africa
Posts: 2,810
Default

Any news and feed back from teh ROAR Nats ???
__________________
Casterracing ZX1.5R
casterracing EX-1 Pro, SP Silver Arrow
TOP Racing Scythe, SP 17.5, SP GT Pro 2.0
TOP Racing Scythe, SP 4.5 V2, Hobbywing Xerun 120SD 2.0
TOP Racing Scythe, SP 13.5, Hobbywing Xerun 120SD 2.0
razzor is offline   Reply With Quote
Old 06-27-2008, 01:13 PM   #1087
Tech Fanatic
 
Join Date: Oct 2003
Location: bella vista ar
Posts: 869
Send a message via AIM to ERTRACHTER
Default

SORRY FOR THE DELAY ON THE NATS GUYS I QUALIFIED 8TH AND FINISHED 10TH IN STOCK KYLE BERGSTROM QUALIFIED 6TH AND FINISHED 3RD IN SUPERSTOCK AND JOSH CYRUL QUALIFIED 8TH IN SUPERSTOCK AND MOD AND I BELIEVE HE FINISHED 4TH IN EACH CLASS SO NOT A BAD WEEKEND AGAIN FOR THE T.O.P. TEAM
__________________
ASSOCIATED 12r5.1,REEDY MOTOR AND BATTERY, LRP SPEEDO,KIMBROUGH PRODUCTS,BIG DOG RACING,BELMONT R/C SPEEDSHOP, DENNIS LYMAN RACING, TEAM TOSO, TEAM FACTORY BITTER, SCHUUR SOLUTIONS, SIMMONS RACING, TEAM BOOZCRUZ
ERTRACHTER is offline   Reply With Quote
Old 06-27-2008, 01:25 PM   #1088
Tech Champion
 
John Tag's Avatar
 
Join Date: May 2004
Location: Huntersville, NC
Posts: 8,925
Trader Rating: 42 (100%+)
Default

Great runs this weekend Jason.. Always in the hunt to no supprise..

You got a PM..THX......
__________________
www.express-motorsports.net for all your motor needs
Multi time National Champions,Reedy Champs,Vegas Champs,Birds, Champs,[email protected]

Team Associated-Express Motorsports-Trinity-Reflex Racing-A Main Hobbies-ProtekRC
John Tag is offline   Reply With Quote
Old 06-28-2008, 09:47 AM   #1089
Tech Champion
 
STLNLST's Avatar
 
Join Date: Sep 2001
Location: Sacramento
Posts: 8,999
Trader Rating: 21 (100%+)
Default

Quote:
Originally Posted by ERTRACHTER View Post
SORRY FOR THE DELAY ON THE NATS GUYS I QUALIFIED 8TH AND FINISHED 10TH IN STOCK KYLE BERGSTROM QUALIFIED 6TH AND FINISHED 3RD IN SUPERSTOCK AND JOSH CYRUL QUALIFIED 8TH IN SUPERSTOCK AND MOD AND I BELIEVE HE FINISHED 4TH IN EACH CLASS SO NOT A BAD WEEKEND AGAIN FOR THE T.O.P. TEAM
you coming up for the speedworld cup?
STLNLST is offline   Reply With Quote
Old 07-02-2008, 12:48 PM   #1090
Tech Master
 
Join Date: Sep 2007
Location: Helmond
Posts: 1,544
Default

TOP is working on a new 1:10 car and a 1:12 scale car.

Now i can't wait till i see the new cars and as they make the 1:12 so good as the TOP Scythe than i want it.
__________________
http://www.mikky32.com
Tekin RS pro
TOP racing Photon
Tekin Redline 10,5
Protoform LTC-R
mikky32 is offline   Reply With Quote
Old 07-02-2008, 01:13 PM   #1091
Tech Adept
 
Join Date: Aug 2006
Posts: 242
Default

Hello, this past weekend i run Nationals, with my new "TOP" car ,only can classified for final C, with only 2 heats run, because my car have a lot of tweak, and i don´t know why ,changed the Top deck, new and cut, a new chassis, 2.5 mm US, new servo, loose screws,...etc, and the car never run straight, always turn to left hand, and hold this position, more dificult to drive.
i need some advices, to solve the problem.

The car run very good, some short times, more fast, 2 or 3 laps, i run with all alu parts, without the front post.
I get the feeling that the top deck is short, ¿...?

Congratulations ERTRACHTER , is possible to know the setups.

Greetings, Luis C.
luic is offline   Reply With Quote
Old 07-02-2008, 01:45 PM   #1092
Tech Elite
 
razzor's Avatar
 
Join Date: Aug 2005
Location: Durban, South Africa
Posts: 2,810
Default

Quote:
Originally Posted by mikky32 View Post
TOP is working on a new 1:10 car and a 1:12 scale car.

Now i can't wait till i see the new cars and as they make the 1:12 so good as the TOP Scythe than i want it.
Cool news bud
Look forward to it .
__________________
Casterracing ZX1.5R
casterracing EX-1 Pro, SP Silver Arrow
TOP Racing Scythe, SP 17.5, SP GT Pro 2.0
TOP Racing Scythe, SP 4.5 V2, Hobbywing Xerun 120SD 2.0
TOP Racing Scythe, SP 13.5, Hobbywing Xerun 120SD 2.0
razzor is offline   Reply With Quote
Old 07-02-2008, 01:46 PM   #1093
Tech Elite
 
yyhayyim's Avatar
 
Join Date: May 2006
Location: Weston, FL
Posts: 3,424
Trader Rating: 26 (100%+)
Default

Quote:
Originally Posted by luic View Post
Hello, this past weekend i run Nationals, with my new "TOP" car ,only can classified for final C, with only 2 heats run, because my car have a lot of tweak, and i don´t know why ,changed the Top deck, new and cut, a new chassis, 2.5 mm US, new servo, loose screws,...etc, and the car never run straight, always turn to left hand, and hold this position, more dificult to drive.
i need some advices, to solve the problem.

The car run very good, some short times, more fast, 2 or 3 laps, i run with all alu parts, without the front post.
I get the feeling that the top deck is short, ¿...?

Congratulations ERTRACHTER , is possible to know the setups.

Greetings, Luis C.
Hola Luis,

chequea que todos los shocks tengan el mismo rebote y compresion, y que todos tengan el mismo largo. Tambien pon el carro en tweak station y esegurate que este bien balanciado.

Prueba el carro- debe correr derechito como una flecha...si sigue con los mismos problemas, entonces es un problema mas serio.
yyhayyim is offline   Reply With Quote
Old 07-02-2008, 02:28 PM   #1094
Tech Elite
 
sosidge's Avatar
 
Join Date: Dec 2001
Location: Bristol, UK
Posts: 3,865
Default

Quote:
Originally Posted by luic View Post
The car run very good, some short times, more fast, 2 or 3 laps, i run with all alu parts, without the front post.
I get the feeling that the top deck is short, ¿...?
Try the car plastic.

Also, check that your servo saver is not sloppy, a bad servo saver will make the car drift to the side.

If the bottom deck of the chassis is flat and all the parts are moving freely there is no reason why you should suffer from any tweak.
sosidge is offline   Reply With Quote
Old 07-02-2008, 04:16 PM   #1095
Tech Adept
 
Join Date: Aug 2006
Posts: 242
Default

Thank you very much, for the fast replys, now i know because some guys make a TQ easy, training write fast in rctech..

All shocks, parts, servo saver, etc... are testing, i test all four tyres touch the floor at the same time, before run the car, run well 2 or 3 first laps, only.

The only part i suspect, is the top deck, the bottom deck is flat, but when thigten the screws of the top deck, the bottom is bends upward.
i have the delrin spool, and after de race, i cheked it and have a lot of play, this is possible another problem.

Muchas Gracias, yyhayyim, ya probe todo esto y seguia igual, este finde lo testeare un poco mas, a ver si soluciono el problema.

Greetings, Luis C.
luic is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
***** SCYTHE red " IIC 2007" edition***** spy R/C Items: For Sale/Trade 5 12-01-2007 10:21 AM
"""NEW""" Collari .21 3 port buggy motor lc21-b3 goneRVing R/C Items: For Sale/Trade 7 12-20-2006 06:25 PM
STUFF FOR SALE """"LQQK """" EZRC R/C Items: For Sale/Trade 11 10-22-2006 09:49 PM
""" XRAY FK05 """ excellent cond/super clean/stock evostyle R/C Items: For Sale/Trade 9 06-29-2006 10:04 PM
New TEAM ASSOCIATED RC10L3 "Touring" pan car for sale. "TEAM VERSION" Ron Meloni R/C Items: For Sale/Trade 0 06-24-2003 03:37 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 04:29 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net