3racing Sakura FGX EVO
#106
Tech Initiate
Thanks
Oh and chassis looks like it could be GRP, not FRP.
I have the 3racing TC chassis and it looks like its made of the same material. Its basically heavy duty fiberglass.
Oh and chassis looks like it could be GRP, not FRP.
I have the 3racing TC chassis and it looks like its made of the same material. Its basically heavy duty fiberglass.
#107
Tech Prophet
iTrader: (9)
Join Date: Nov 2014
Location: Far south suburbs of Chicago area
Posts: 17,629
Trader Rating: 9 (100%+)
Begin bag #5. Not much smal steps. Assembled 4 more turnbuckles this morning.
#108
Tech Prophet
iTrader: (9)
Join Date: Nov 2014
Location: Far south suburbs of Chicago area
Posts: 17,629
Trader Rating: 9 (100%+)
Rear suspension is definitely different
#109
Tech Prophet
iTrader: (9)
Join Date: Nov 2014
Location: Far south suburbs of Chicago area
Posts: 17,629
Trader Rating: 9 (100%+)
Front swaybar installed. One complaint I’ve got with the kit. Would make things easier if they had included a turnbuckle wrench. The ones used are smaller then every turnbuckle wrench I have.
#111
Tech Prophet
iTrader: (9)
Join Date: Nov 2014
Location: Far south suburbs of Chicago area
Posts: 17,629
Trader Rating: 9 (100%+)
3mm I believe. If I was more detailed oriented, and measured them out first, would have saved time. But I’m not, so it be process of installing them, looking, remove, repeat.
In previous builds. The assembly guide diagrams for turnbuckle were “actual size”. I’d just use that as a measurement. Not so with this one. Going to look around my house, think one of my small scales had to have a wrench that would work.
In previous builds. The assembly guide diagrams for turnbuckle were “actual size”. I’d just use that as a measurement. Not so with this one. Going to look around my house, think one of my small scales had to have a wrench that would work.
#112
Nice front swaybar... I must see if it can fit the Mckune chassis...
#113
Tech Prophet
iTrader: (9)
Join Date: Nov 2014
Location: Far south suburbs of Chicago area
Posts: 17,629
Trader Rating: 9 (100%+)
Today progress
#114
Tech Prophet
iTrader: (9)
Join Date: Nov 2014
Location: Far south suburbs of Chicago area
Posts: 17,629
Trader Rating: 9 (100%+)
Today progress
#115
Tech Adept
Nice upgrade on the shock shafts....the original was barely 2mm....bowed like hell when actuated.
#116
Hello , Did EXOTEK plan to re release the conversion kit for FGX ? Mike ?
#117
Tech Prophet
iTrader: (9)
Join Date: Nov 2014
Location: Far south suburbs of Chicago area
Posts: 17,629
Trader Rating: 9 (100%+)
Rear wing almost complete. Have to find 2 screws the list needed.
#118
Has anybody driven this new kit on carpet track? I’m curios to see actual builds and videos of the car
#119
Tech Prophet
iTrader: (9)
Join Date: Nov 2014
Location: Far south suburbs of Chicago area
Posts: 17,629
Trader Rating: 9 (100%+)