HB Racing E817
#31
Tech Fanatic
iTrader: (2)
HB Racing E817 coming soon
http://www.neobuggy.net/2016/09/14/h...7-coming-soon/
...full production of the E817 is in progress, with a release date by the end of 2016.
#32
Tech Addict
Interesting thoughts. I could be reading too much into the CAD drawing provided, but there appears to be a lower chassis brace directly under the drive shaft more commonly found in 10th scales; the Xray xb4 comes to mind...
I note that the Tekno used a 4mm chassis, while this one would be 3mm...
Area highlighted in yellow in pic attached, what else could it be, a wire guide perhaps
I note that the Tekno used a 4mm chassis, while this one would be 3mm...
Area highlighted in yellow in pic attached, what else could it be, a wire guide perhaps
#33
Tech Master
Interesting thoughts. I could be reading too much into the CAD drawing provided, but there appears to be a lower chassis brace directly under the drive shaft more commonly found in 10th scales; the Xray xb4 comes to mind...
I note that the Tekno used a 4mm chassis, while this one would be 3mm...
Area highlighted in yellow in pic attached, what else could it be, a wire guide perhaps
I note that the Tekno used a 4mm chassis, while this one would be 3mm...
Area highlighted in yellow in pic attached, what else could it be, a wire guide perhaps
The car has a lengthwise aluminum tube for a chassis stiffener.
So rotational chassis flex is very good, as each end has a ball end.
#34
Tech Apprentice
Anymore news on this badboy???
#35
I really hope a rear Skid plate like the nitro car is part of the final design.
#37
#38
Tech Apprentice
So got a response from Hot Bodies on Facebook. Said they are taking orders from distributors for first batch and will be available before the end of November.
#40
Tech Apprentice
not sure what the price will be. probably between $599 to $629. thats my guess going by what the D815V2 kit is.
#42
#44
Guys.Any chance to buy for xmas?
#45
The distributor in Australia is expecting them mid to late November so I assume other countries would be the same?