TLR SCTE 3.0 Thread
#76
Tech Prophet
iTrader: (34)
Never had an issue with nose down on this truck. I have always been able to control with throttle input. This could be solved with revised front arms and change the wheel base on the front similar to the rear hub adjustment but this will not be done on the 3.0 as the truck is in production and on it's way. TLR uses the inserts to change the kickup/Caster adjustments. SCTE has always jumped better then the tekno from what I have seen some may disagree with me on that but my personal observation. The truck will tend to be nose down however I have never had it be an issue even on massive jumps outdoor or indoor. I don't see this change being added to the SCTE anytime soon but I don't make those decisions. That change would require a revised front end.
#78
Tech Prophet
iTrader: (34)
The inserts are up and down. You would need different mounting blocks to change the direction of the inserts. I am not sure what kind of clearance there is to angle the arms as well as front end width issues that might result. There is more to look at then just the insert issue.
#79
Tech Master
iTrader: (36)
Why do you want to do this? You want to adjust the front arms like we sweep the rear arms for toe in adjustment?
The front end is already setup to adjust kickup. I suppose in theory you could change a pivot to make one of them adjust front toe but that is what the steering link can be used for. Not sure what you are trying to accomplish here.
The front end is already setup to adjust kickup. I suppose in theory you could change a pivot to make one of them adjust front toe but that is what the steering link can be used for. Not sure what you are trying to accomplish here.
Any set up recommendation medium track blue groove.
My local track is this.
http://youtu.be/aTLDKw3Wb_k
Last edited by raved007; 08-01-2016 at 02:13 PM. Reason: Video link
#80
Tech Prophet
iTrader: (34)
Casper,
Any set up recommendation medium track blue groove.
My local track is this.
https://youtu.be/NLZuT_mMwMw
Any set up recommendation medium track blue groove.
My local track is this.
https://youtu.be/NLZuT_mMwMw
#81
Any video's of Mayfield racing nat's with scte 3.0
#84
Thanks for looking Frank.
#85
Tech Apprentice
springs?
Just pre-ordered my SCTE 3.0!!!!!!
Will this truck share the same shocks as any other TLR vehicles? If so, which one? I'd like to purchase some different shock springs and components ahead of time. Thanks!
Also a bit off topic, if anyone would like to recommend a motor combo and steering servo feel free to PM me
Will this truck share the same shocks as any other TLR vehicles? If so, which one? I'd like to purchase some different shock springs and components ahead of time. Thanks!
Also a bit off topic, if anyone would like to recommend a motor combo and steering servo feel free to PM me
#86
Just pre-ordered my SCTE 3.0!!!!!!
Will this truck share the same shocks as any other TLR vehicles? If so, which one? I'd like to purchase some different shock springs and components ahead of time. Thanks!
Also a bit off topic, if anyone would like to recommend a motor combo and steering servo feel free to PM me
Will this truck share the same shocks as any other TLR vehicles? If so, which one? I'd like to purchase some different shock springs and components ahead of time. Thanks!
Also a bit off topic, if anyone would like to recommend a motor combo and steering servo feel free to PM me
#87
Tech Apprentice
#90
Tech Apprentice
Frank how many packages of the aluminum 5 - 40 lock nuts does it take for the 3.0 truck if my count is right I can get away with just two packages