Sworkz S35-2E 1/8 eBuggy
#16
Tech Legend
iTrader: (294)
I have the original ebuggy from them and have yet to break anything on it. Last season, I broke the track record with it and after the race, everyone was coming up and asking what brand it was and telling me how good the car looked.
I actually prefer it over my 8ight-E 3.0
I actually prefer it over my 8ight-E 3.0
#18
Tech Legend
iTrader: (294)
lol, anymore we can throw into that hybrid list? like they all got into a big pile ala south park and this was the offspring.
One area I am also curious on is the motor to ESC spacing. it looks pretty snug, so I am curious for motors that have the sensor port coming from the top of the can, is there room between the larger style escs (basically, stuff that isn't Tekin RX8) and the motor so you don't bump the motor against the esc and the sensor port and cause issues.
One area I am also curious on is the motor to ESC spacing. it looks pretty snug, so I am curious for motors that have the sensor port coming from the top of the can, is there room between the larger style escs (basically, stuff that isn't Tekin RX8) and the motor so you don't bump the motor against the esc and the sensor port and cause issues.
#19
is the front gearbox angled ? the long drive shaft will only work on the straight transmission. I had the hobao hyper 9e buggy and the long center shaft wobbled ...
#20
Tech Elite
iTrader: (27)
lol, anymore we can throw into that hybrid list? like they all got into a big pile ala south park and this was the offspring.
One area I am also curious on is the motor to ESC spacing. it looks pretty snug, so I am curious for motors that have the sensor port coming from the top of the can, is there room between the larger style escs (basically, stuff that isn't Tekin RX8) and the motor so you don't bump the motor against the esc and the sensor port and cause issues.
One area I am also curious on is the motor to ESC spacing. it looks pretty snug, so I am curious for motors that have the sensor port coming from the top of the can, is there room between the larger style escs (basically, stuff that isn't Tekin RX8) and the motor so you don't bump the motor against the esc and the sensor port and cause issues.
looks like a hobbywing esc, they are freaking humongous...
#21
Tech Rookie
sworkz.com/wp-content/uploads/SW-910024_09.jpg
#23
Tech Rookie
The buggy looks amazing, Have 2 other sworkz and they perform! price, quality. Any kit building info? Photos?
#25
Tech Rookie
sworkz.com/pdf/S35-2E_Manual_Final.pdf
I notice rather too many mentions of the S350 EVO, within the above S35-2E manual - yes, there are many similar components, but newcomers may find the repeated mentions of the S350 EVO to be ambiguous and unnecessarily confusing, and I feel sWorkz should've made more of an effort to focus the S35-2E manual specifically upon the S35-2E.
The above niggle notwithstanding, I haven't bought this kit yet, but I'm seriously considering it!
#26
Tech Addict
kissmyrc..... I think part of that reason is when we were doing manual we were not used to calling it s35 yet...we just thought they would change notes in manual when putting all our notes together to do it.
the s35-2e stands for s350 second edition... they just shortened it up so easier.
sorry guys haven't been on as much.. just super busy
the s35-2e stands for s350 second edition... they just shortened it up so easier.
sorry guys haven't been on as much.. just super busy
#27
Tech Legend
iTrader: (294)
how heavy is sworkz "invested" in selling stuff in "part trees"? Reason I ask this is on the durango line up, there 1/10 stuff at least goes pretty heavy in part tree usage where parts that are the ones you want are tied in with an expensive part tree with a bunch of stuff you don't want, including things from a totally different vehicle model.
Also, if Sworkz finds a part that is part of a part tree that is being requested a lot, how open are they to breaking that out into its own part # and how quickly would they do that?
Also, if Sworkz finds a part that is part of a part tree that is being requested a lot, how open are they to breaking that out into its own part # and how quickly would they do that?
#28
I really like the look of the buggy, only thing that sticks out is there seems to be an awful lot of weight forward. May just be the design, but I'd think there may be issues with keeping her ass behind her, instead, blowing out sideways exiting tight turns or high speed sweepers. Which we have at my local. I'm a huge fan of running what nobody else has and there isn't an SWorkz insight. I may just jump on one and give it a go.
#30