R/C Tech Forums - Team Associated B6 & B6D thread

Page 92 of 611

« First

Show 40 post(s) from this thread on one page

R/C Tech Forums (https://www.rctech.net/forum/)

- Electric Off-Road (https://www.rctech.net/forum/electric-off-road-4/)

- - Team Associated B6 & B6D thread (https://www.rctech.net/forum/electric-off-road/941483-team-associated-b6-b6d-thread.html)

otter

07-12-2016 09:49 AM

Quote:

Originally Posted by michwolv (Post 14598954)

Is there anywhere to get the B6D?

NorCal Hobbies had a pile of them when I was in there yesterday

rvrslt1

07-12-2016 10:12 AM

Quote:

Originally Posted by Socket (Post 14599075)

Gear diffs and 17.5 do not mix. Those things are HEAVY.

Wenger right now is KILLING it in 17.5 with the D car at OCRC.

Is he using the lay down trans? My B6D is showing up today:)

kdub	07-12-2016 10:30 AM

B6D indoor clay setup

1 Attachment(s)

Here is my OCRC Setup after a few days running the B6D. This is medium to high grip indoor clay.

rvrslt1

07-12-2016 10:41 AM

Quote:

Originally Posted by kdub (Post 14599144)

Here is my OCRC Setup after a few days running the B6D. This is medium to high grip indoor clay.

Thank you. So the B5M rear hubs will still work on the B6?

Matt Trimmings

07-12-2016 10:42 AM

Quote:

Originally Posted by rvrslt1 (Post 14599160)

Thank you. So the B5M rear hubs will still work on the B6?

Yes, they will work on the B6D, the B6 utilizes a different roll center insert in the hub and the Schelle hubs wont be able accommodate that setting for.

Johnn27

07-12-2016 10:51 AM

Springs

I have not seen any set ups using the kit springs ?

Matt Trimmings

07-12-2016 10:52 AM

Quote:

Originally Posted by Johnn27 (Post 14599177)

I have not seen any set ups using the kit springs ?

The stock setup uses kit springs. :D

goehm

07-12-2016 11:03 AM

Quote:

Originally Posted by Socket (Post 14599075)

Gear diffs and 17.5 do not mix. Those things are HEAVY.

I weighed my SRX2 gear vs ball, and gear was lighter. What's the weight difference between the AE diffs?

rvrslt1

07-12-2016 11:16 AM

Quote:

Originally Posted by Matt Trimmings (Post 14599164)

Yes, they will work on the B6D, the B6 utilizes a different roll center insert in the hub and the Schelle hubs wont be able accommodate that setting for.

I plan to run the B6D with the lay down trans so does not sound like my B5m hubs will work

Matt Trimmings

07-12-2016 11:18 AM

Quote:

Originally Posted by rvrslt1 (Post 14599205)

I plan to run the B6D with the lay down trans so does not sound like my B5m hubs will work

Try the different inserts in the stock hubs. You may like the std D setting and in that case your schelle hubs would work.

Socket

07-12-2016 11:51 AM

Quote:

Originally Posted by rvrslt1 (Post 14599121)

Is he using the lay down trans? My B6D is showing up today:)

Stand up.

Socket

07-12-2016 11:52 AM

Before I start doing homework, had to fire up the lathe :p

https://scontent.fphx1-2.fna.fbcdn.n...22527422_o.jpg

Socket

07-12-2016 11:52 AM

Also got some goodies in...shooting for 1400 grams with a fullsize shorty.

https://scontent.fphx1-2.fna.fbcdn.n...20&oe=57F175FA

DG Designs

07-12-2016 01:37 PM

Quote:

Originally Posted by goehm (Post 14599189)

I weighed my SRX2 gear vs ball, and gear was lighter. What's the weight difference between the AE diffs?

I thought i read someplace that gear diffs were actually lighter. It seemed counter intuitive so it stuck in my head.

fullsyzz

07-12-2016 02:24 PM

Quote:

Originally Posted by kdub (Post 14599144)

Here is my OCRC Setup after a few days running the B6D. This is medium to high grip indoor clay.

Yokomo green rear spring....Yatabe 1050 green, or A1200 green?

All times are GMT -7. It is currently 03:28 PM.

Page 92 of 611

Show 40 post(s) from this thread on one page