Go Back  R/C Tech Forums > General Forums > Electric Off-Road
Tekno RC SCT410.3 Thread >

Tekno RC SCT410.3 Thread

Like Tree175Likes

Tekno RC SCT410.3 Thread

    Hide Wikipost
Old 10-10-2017, 01:54 PM   -   Wikipost
R/C Tech ForumsThread Wiki: Tekno RC SCT410.3 Thread
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: DirkW
Welcome to the SCT410.3 Wiki!

7.26.17 - BB
In order to run the recommended team setup, you need the following optional parts:
TKR6106 Orange LF Springs
TKR6114 Green LF Springs
TKR6018 composite shock caps (built to emulsion) OR TKR8702 Aluminum Emulsion Shock caps
TKR8027 Shock Stand Offs
TKR6051 8x1.3 pistons(drilled to 1.4mm)
TKR8104 .4 bellcranks
TKR8100 .4 ackerman
TKR5545B HRC Hubs
You also need the Aluminum C Block (others can stay composite)

What option parts should I consider buying with a new kit?
None are required but we recommend the following:

TKR5161 V2 Adjustable Hinge Pin Brace A block, 7075 CNC, EB/NB/ET/NT/SCT) - Helps to improve durability on hard crashes.

TKR5163 V2 Adjustable Hinge Pin Brace C block, 7075 CNC, EB/NB/ET/NT/SCT) - Helps to improve durability on hard crashes.

TKR5545B HRC Rear Hubs (L/R, CV or uni, SCT.3/SL) - Improves stability of the rear on mid to corner exit. Allows harder acceleration on corner exit.

TKR6146 - CNC Delrin Shock Cartridge Set

TiNi Shock Shafts
-TKR6004T (front)
-TKR6017T (rear)


What spare parts should I keep on hand?
TKR5020 Hinge Pins (inner, front/rear)
TKR5516 Front Suspension Arms and TKR5515 Rear Suspension Arms
TKR5542 Spindle Carriers - TKR5541B Spindles
TKR6009 Shock O-Ring and Bladder Set (for 2 shocks)

Tips and Tricks

List of Vehicle Setup Adjustments and Build Tips can be found here. There are several videos and articles detailing the building of shocks, diffs, camber links, etc.

Setup Sheets:
Setup sheets for all Tekno RC vehicles can be found here. Please be sure to try our recommended setup. It works very well on most tracks.

Warranty Policy:
Tekno RC is the only company in the industry that will give 50% off of parts if returned to them using the General Warranty return policy found on their website. The parts can be lightly used or completely abused, as long as the part is still being produced it's covered!

Piston Drills:
Some of our setups recommend using pistons that are enlarged. For instance 4x1.9 or 3x2.0. To drill the pistons we recommend the following:
GMK Supply Piston Drill Set
16PC Metric Bit Set Metric Sizes 2.00 to 3.00 MM.

Print Wikipost

Reply

Old 02-16-2019, 09:50 AM
  #5821  
Tech Rookie
 
Join Date: Jan 2018
Posts: 10
Default

Joe, I haven't lost any screws. Maybe I've been lucky.
dbld49 is offline  
Reply With Quote
Old 02-16-2019, 11:20 AM
  #5822  
Tech Adept
 
JoeRC123's Avatar
 
Join Date: Apr 2016
Posts: 149
Default

Originally Posted by dbld49 View Post
Joe, I haven't lost any screws. Maybe I've been lucky.
Or you don't crash as much as I do. Lol.
JoeRC123 is offline  
Reply With Quote
Old 02-26-2019, 09:43 PM
  #5823  
Tech Adept
 
Join Date: Jul 2015
Posts: 175
Default

Originally Posted by dbld49 View Post
Pro-line's Tekno mounts are discontinued and the slash mounts are not a direct fit.
how do i mod the slash ones to fit?
novaris is offline  
Reply With Quote
Old 02-27-2019, 05:49 AM
  #5824  
Tech Adept
 
JoeRC123's Avatar
 
Join Date: Apr 2016
Posts: 149
Default

Originally Posted by novaris View Post
how do i mod the slash ones to fit?
You cant. See above pictures. You can only use the thumb nuts from the slash kit if you have it already. You have to modify the stock Tekno posts.
JoeRC123 is offline  
Reply With Quote
Old 02-28-2019, 04:59 PM
  #5825  
Tech Rookie
 
Join Date: Dec 2018
Location: Miami
Posts: 3
Default EB48.4 Hinge Pin Blocks

So Ive got an EB48.4 as a spare and have the stock alloy ABC and D blocks. The A block is part number tkr8161.

The V2 A block that is listed to fit both the EB48 and the SCT410.3 is part number tkr5161.

Has anyone fitted the EB48.4 blocks on the SCT410.3? I see one is for a socket head and the other is for a tapered head. Are theyre any other significant differences? Im asking because I dont want to spend another $100 on these if I dont need to.

Thanks
Dyrden is offline  
Reply With Quote
Old 03-09-2019, 06:36 PM
  #5826  
Tech Rookie
 
Join Date: Mar 2019
Posts: 1
Default

I built my sct410.3 this past week which is my first RC car/truck. Today I got it out on the track and had a blast. Towards the end of the day though one of my 5x4mm set screws came out which turned my 4wd into a 2wd.

one of the fellow racers had a small box of Tekno RC Screwz and in that set he had the right set screw BUT it's a tad too long unlike the original.

I'm home now and I was researching these RC Screwz sets and it states that they have every replacement screw in the kit, but I'm not so sure now because the guy who helped me couldn't find a shorter set screw in the set.

Do any of you have this RC Screwz set? Can you verify if they have the shorter 5x4mm set screw? I would like to order myself a set but not if these sets don't have the same size screws as the original tekno screws.

thanks for any info.
dbeland is offline  
Reply With Quote
Old 03-10-2019, 09:11 AM
  #5827  
Tech Adept
 
JoeRC123's Avatar
 
Join Date: Apr 2016
Posts: 149
Default

TKR1603? Always use blue locktite on metal to metal fasteners.

https://www.amainhobbies.com/tekno-rc-5x4mm-set-screw-10-tkr1603/p231871
.

Last edited by JoeRC123; 03-10-2019 at 10:58 AM.
JoeRC123 is offline  
Reply With Quote
Old 03-11-2019, 07:12 PM
  #5828  
Tech Fanatic
iTrader: (33)
 
suzukipro's Avatar
 
Join Date: Jan 2013
Location: WI
Posts: 917
Trader Rating: 33 (100%+)
Default

Originally Posted by RCSteveH View Post
Just did this mod to mine and my sons Tekno's, I also added some velcro (the soft side) to the flat surface area. Hoping this helps improve the life of bodies, my 8 yr old son has a knack for destroying bodies faster than I can keep up with shoe goo & zip tie repairs.

I did notice that the body seems more secure with the plastic nuts securing them to the posts than hairpins do, hopefully this works as intended...
suzukipro is offline  
Reply With Quote
Old 03-16-2019, 09:02 AM
  #5829  
Tech Adept
 
JoeRC123's Avatar
 
Join Date: Apr 2016
Posts: 149
Default

Does anyone know the thread pitch of these Proline M4 x 12mm set screws? I need some longer ones, like 16mm but don't know the pitch. I just ordered some from eBay that were 0.7 pitch. Seems like that's standard coarse pitch for this size screw.

Last edited by JoeRC123; 03-16-2019 at 09:47 AM.
JoeRC123 is offline  
Reply With Quote
Old 03-17-2019, 08:46 AM
  #5830  
Tech Rookie
 
Join Date: Jan 2018
Posts: 10
Default

Originally Posted by JoeRC123 View Post
Does anyone know the thread pitch of these Proline M4 x 12mm set screws? I need some longer ones, like 16mm but don't know the pitch. I just ordered some from eBay that were 0.7 pitch. Seems like that's standard coarse pitch for this size screw.
M4 x .7 is correct.
JoeRC123 likes this.
dbld49 is offline  
Reply With Quote
Old 03-17-2019, 10:31 AM
  #5831  
Tech Adept
 
JoeRC123's Avatar
 
Join Date: Apr 2016
Posts: 149
Default

Originally Posted by dbld49 View Post
M4 x .7 is correct.
Thanks.
JoeRC123 is offline  
Reply With Quote
Old 03-20-2019, 07:43 AM
  #5832  
Tech Master
iTrader: (43)
 
WonTonsChicken's Avatar
 
Join Date: Dec 2013
Location: Martinsburg, WV
Posts: 1,525
Trader Rating: 43 (100%+)
Default

Anyone have setup sheets for indoor clay, smooth, low/med grip?
WonTonsChicken is offline  
Reply With Quote
Old 03-21-2019, 06:09 AM
  #5833  
Tech Elite
iTrader: (176)
 
Join Date: Mar 2014
Posts: 4,863
Trader Rating: 176 (100%+)
Default

Can anyone tell me the differences to spot between a the .3 and .2 models?
thecaptain is online now  
Reply With Quote
Old 03-21-2019, 01:28 PM
  #5834  
Tech Regular
iTrader: (2)
 
shadaloo's Avatar
 
Join Date: Oct 2016
Location: fla
Posts: 266
Trader Rating: 2 (100%+)
Default

I don't think there was a .2 was there? Anyway here are the updates to the .3

SCT410.3 New Features and Improvements:

Drivetrain Improvements:
  • The diffs feature smoother gears and a new 1-piece composite diff cross pin.
  • The old steel driveshaft has been replaced with a new tapered aluminum design.
  • All of the outdrives and couplers are now lightened.
  • Angled rear gearbox with larger bearings is now standard.
  • Results dramatically reduced rotating mass, improved acceleration and efficiency.
Suspension Improvements:
  • All new front and rear suspension geometry.
  • New reduced height front and rear shock towers.
  • New V2 hinge pin brace system for incredible adjustability.
  • New front arms feature a flat bottom for increased durability and clearance.
  • New rear arms feature the flat bottom but are also 4mm longer.
  • New rear hubs with reduced offset to match the longer rear arms.
  • New longer rear sway bar.
  • New clamping spring perches with captured shock boots.
  • New droop adjustment screws are now standard.
  • Results lower CG, increased adjustability, increased stability, and increased consistency.
Weight, Durability, and other Improvements:
  • Lightened black anodized 4mm CNC chassis is now standard.
  • Aluminum pivot balls throughout.
  • Aluminum suspension and spindle bushings are now standard.
  • New lighter camber link rod ends and turnbuckles.
  • LCG Lightened Motor mount is now standard.
  • M5 stub axles are now standard.
  • Split center diff mount makes maintenance a breeze.
  • Lightened metal clamping 12mm wheel hexes are now standard.
  • Revised front bumper increases ground clearance.
  • Larger 6x13x5mm (vs. 6x12x4mm) outer wheel bearings front and rear increases durability.
  • Spindles feature adjustable stops for more precise steering control.
  • Compatibility with existing parts and options.
  • Results lower CG, improved handling, improved acceleration, and improved durability.
shadaloo is offline  
Reply With Quote
Old 03-22-2019, 09:43 AM
  #5835  
Tech Regular
 
Join Date: Mar 2011
Location: Chicago
Posts: 369
Default

Whats the best 17mm wheel adapters for this truck, thanks
Roken is offline  
Reply With Quote

Thread Tools
Search this Thread

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service