Xray Xb2 spyshots
03-14-2015, 03:16 PM
#17
Malin had her first test outdoors on astro with the new Xray XB2 2WD prototype after running it indoors on carpet earlier.
Track was a bit damp and slippery and it is still a bit cold outside at just 2.5*C (36.5*F) so she was running Ballistic Green Spike tires in the rear instead of the usual Yellow Mini Pin or Mini Spike.
Still have a lot of setup and parts testing to do but felt really promising for a first try
Running the XB2 unweighted at 1480g in the short video here.
Bent
Track was a bit damp and slippery and it is still a bit cold outside at just 2.5*C (36.5*F) so she was running Ballistic Green Spike tires in the rear instead of the usual Yellow Mini Pin or Mini Spike.
Still have a lot of setup and parts testing to do but felt really promising for a first try
Running the XB2 unweighted at 1480g in the short video here.
| + YouTube Video | |
Bent
Last edited by BentKa; 03-14-2015 at 03:45 PM.
04-25-2015, 07:25 PM
#18
Man this looks really good on that track. Can't wait for an official release date. Any idea when that may be?
05-03-2015, 11:00 PM
#19
A bit of astro practice this weekend with the Xray XB2 prototype:
Her setup in the video:
Xray XB2 2WD prototype
ORCA VX3 esc
ORCA RX3 6.5T motor
ORCA 100C | 7.4V | 4800mAh shorty battery
Futaba 4PX transmitter
Futaba R304SB-E receiver
Futaba S9353HV servo
Schumacher Cut Stagger LP front tires
Schumacher Mini Spike 2 rear tires
https://youtu.be/Ico_hwPOa5Y
Bent
Her setup in the video:
Xray XB2 2WD prototype
ORCA VX3 esc
ORCA RX3 6.5T motor
ORCA 100C | 7.4V | 4800mAh shorty battery
Futaba 4PX transmitter
Futaba R304SB-E receiver
Futaba S9353HV servo
Schumacher Cut Stagger LP front tires
Schumacher Mini Spike 2 rear tires
https://youtu.be/Ico_hwPOa5Y
| + YouTube Video | |
Bent
05-11-2015, 01:02 PM
#20
More testing of the new Xray XB2
Running it at different weights this time around and getting it dialed in.
Running at 1503 grams in the video.
Lap times dropping for each and every run
Her setup in the video:
Xray XB2 2WD prototype
ORCA VX3 esc
ORCA RX3 6.5T motor
ORCA 100C | 7.4V | 4800mAh shorty battery
Futaba 4PX transmitter
Futaba R304SB-E receiver
Futaba S9353HV servo
Schumacher Cut Stagger LP front tires
Schumacher Mini Spike 2 rear tires
Bent
Running it at different weights this time around and getting it dialed in.
Running at 1503 grams in the video.
Lap times dropping for each and every run
Her setup in the video:
Xray XB2 2WD prototype
ORCA VX3 esc
ORCA RX3 6.5T motor
ORCA 100C | 7.4V | 4800mAh shorty battery
Futaba 4PX transmitter
Futaba R304SB-E receiver
Futaba S9353HV servo
Schumacher Cut Stagger LP front tires
Schumacher Mini Spike 2 rear tires
| + YouTube Video | |
Bent
05-11-2015, 09:51 PM
#23
I'll start caring when a press release comes out.
05-11-2015, 10:20 PM
#24
It's a Polybutler pit box from http://www.polybutler.de
A very common pit box here in Europe
Bent
05-11-2015, 10:23 PM
#25
Malin's liking
Bent
Last edited by BentKa; 05-12-2015 at 03:12 AM.
05-11-2015, 10:44 PM
#26
05-12-2015, 09:41 PM
#28
05-13-2015, 09:24 AM
#29
Juraj Hudy on Facebook:
Bent
Working on another all-new XB2 prototype. So far the most demanding and challenging RC car project for me ever.
I have never thought that to design a 1/10 off-road car that works in all track conditions - carpet, clay, dust, astro - would be so much complex and difficult task.
The recent progress is very positive and I am getting more confident all the time.
Now more testing on schedule.
I have never thought that to design a 1/10 off-road car that works in all track conditions - carpet, clay, dust, astro - would be so much complex and difficult task.
The recent progress is very positive and I am getting more confident all the time.
Now more testing on schedule.
Last edited by BentKa; 05-13-2015 at 10:04 AM.
05-13-2015, 09:34 AM
#30
Here are her settings for the XB2 2WD
Bent
- VX3 Ver. 4.2
- RX3 6.5T (stock timing)
- Timing start: 5%
- Timing: 7°
- Timing interval: -1
- Turbo delay: 0.02s
- Turbo timing: 10°
- Turbo interval: Normal
- Drag brake: OFF
- Initial brake: OFF
- Brake Freq.: 4K
- Punch level: 5
- PWM: 8K
- Cut Off Voltage: LOW
- Over Heat: 120C
- Neutral Range: 5%
Bent
