108LikesTeam Associated T5M Discussion
05-01-2015, 11:00 AM
#1578
Just got my new Jconcepts Body's all painted up!
05-01-2015, 05:59 PM
#1582
05-01-2015, 08:10 PM
#1586
05-02-2015, 09:10 AM
#1588
Just an FYI and follow up....we started sugaring our track again. The Reedy 8.0 is proving to be a bit much. With a square pack all the way forward and geared at 19/84 I pull wheelies down our long straight and the stock slipper slips too much with the spring bottomed out. Its gotta be the torqueiest mod motor I've ever used. Its fun but I keep flipping over backwards if I squeeze the trigger too hard!
On a seperate note, I finally modified the truck. I installed the +4 C mount and 5mm hexes. I guess that the truck feels marginally better. I'm not sure that I could actually tell the difference.
On a seperate note, I finally modified the truck. I installed the +4 C mount and 5mm hexes. I guess that the truck feels marginally better. I'm not sure that I could actually tell the difference.
05-02-2015, 10:02 AM
#1589
Just an FYI and follow up....we started sugaring our track again. The Reedy 8.0 is proving to be a bit much. With a square pack all the way forward and geared at 19/84 I pull wheelies down our long straight and the stock slipper slips too much with the spring bottomed out. Its gotta be the torqueiest mod motor I've ever used. Its fun but I keep flipping over backwards if I squeeze the trigger too hard!
On a seperate note, I finally modified the truck. I installed the +4 C mount and 5mm hexes. I guess that the truck feels marginally better. I'm not sure that I could actually tell the difference.
On a seperate note, I finally modified the truck. I installed the +4 C mount and 5mm hexes. I guess that the truck feels marginally better. I'm not sure that I could actually tell the difference.
With that much grip I'd run some long camber links in the rear for sure. Probably gray rear springs as well.
05-02-2015, 04:04 PM
#1590
Just an FYI and follow up....we started sugaring our track again. The Reedy 8.0 is proving to be a bit much. With a square pack all the way forward and geared at 19/84 I pull wheelies down our long straight and the stock slipper slips too much with the spring bottomed out. Its gotta be the torqueiest mod motor I've ever used. Its fun but I keep flipping over backwards if I squeeze the trigger too hard!
On a seperate note, I finally modified the truck. I installed the +4 C mount and 5mm hexes. I guess that the truck feels marginally better. I'm not sure that I could actually tell the difference.
On a seperate note, I finally modified the truck. I installed the +4 C mount and 5mm hexes. I guess that the truck feels marginally better. I'm not sure that I could actually tell the difference.