Battery Tray for Electric Conversion - RC10GT
03-24-2014, 10:47 AM
#1
Battery Tray for Electric Conversion - RC10GT
Wasn't sure were this would go since it was a gas truck, but is now electric. Decided to pull my old GT out and breath some new life into her. Been out of this for about 10 years so not sure what all is out there nowadays.. Anyways, looking for the smallest battery holder I can find that will hold a 2S lipo flat (140mm x 50mm). Any recommendations on trays I could use from other cars?
Used zip ties for testing. Thought mesh issues would come up due to flex, but the over-sized base I used for motor mount really stiffened up the rear-end. Runs like a champ, just needs a proper battery restraint.
Used zip ties for testing. Thought mesh issues would come up due to flex, but the over-sized base I used for motor mount really stiffened up the rear-end. Runs like a champ, just needs a proper battery restraint.
03-25-2014, 07:31 AM
#4
Tech Adept
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
