Team Associated RC10 B5m Mid-Motor & Rear Motor Thread
|
|||
#1231
#1232
I've had problems with bearings before in my B4.2 so I'm planning on ordering better bearings for the build. Does anyone have a list of the bearing sizes and quantities? I'm thinking boca, acer, or avid?
#1233
http://www.teamassociated.com/AREA51...background.jpg
on a more serious note
3x7x3 bearings (8) part number: 91475
5x10x4 bearings (8) #: 25237
5x8mm bearing (2) #: 31400
6x12x4 bearing (2) #: 25238
10x15x4 bearing (4) #: 25616
6x13x5 bearing (2) #: 91476
Now the first bearings (3x7x3) are all for the steering so you might not need to find those ones Anyone correct me if I'm wrong on the numbers!
#1234
3x7x3 bearings (8) part number: 91475
5x10x4 bearings (8) #: 25237
5x8mm bearing (2) #: 31400
6x12x4 bearing (2) #: 25238
10x15x4 bearing (4) #: 25616
6x13x5 bearing (2) #: 91476
Now the first bearings (3x7x3) are all for the steering so you might not need to find those ones Anyone correct me if I'm wrong on the numbers![/QUOTE]
Thanks Captain - #1063 should work good... I think I still got some special lube in my pit bag from the last time I ordered those!
5x10x4 bearings (8) #: 25237
5x8mm bearing (2) #: 31400
6x12x4 bearing (2) #: 25238
10x15x4 bearing (4) #: 25616
6x13x5 bearing (2) #: 91476
Now the first bearings (3x7x3) are all for the steering so you might not need to find those ones Anyone correct me if I'm wrong on the numbers![/QUOTE]
Thanks Captain - #1063 should work good... I think I still got some special lube in my pit bag from the last time I ordered those!
#1235
any time
Can someone confirm (or deny) if everything pictured on the car on page one of the thread comes in the team kit? Because I know some of those parts pictured are normally FT options but they are in the picture sooo...
Can someone confirm (or deny) if everything pictured on the car on page one of the thread comes in the team kit? Because I know some of those parts pictured are normally FT options but they are in the picture sooo...
#1237
They have already mentioned that the new cars will come with more traditionally option parts than standard team kits typically have. I don't see any point in waiting for an FT kit. May as well wait for a B6 at that point.
#1240
Hoped to see the E clip on the shock shafts get improved in some way.
Its real problem for myself as I loose a clip and blow out a shock in short time on my Centro.
Also see my teammates experiencing the same issues.
What has been done on the B5 to remedy the problem ?
Note
Know the shock shaft has a new part number, perhaps the shaft is resized to true metric and the clip has a better grip on the larger shaft.
summery
Could I be correct and the shaft size has been changed ?
Its real problem for myself as I loose a clip and blow out a shock in short time on my Centro.
Also see my teammates experiencing the same issues.
What has been done on the B5 to remedy the problem ?
Note
Know the shock shaft has a new part number, perhaps the shaft is resized to true metric and the clip has a better grip on the larger shaft.
summery
Could I be correct and the shaft size has been changed ?
Last edited by Wild Cherry; 01-19-2014 at 12:05 PM.
#1245
Tech Prophet
iTrader: (84)
lololol. Seriously. People drop 459 on kits and still need to buy parts. The tlr 22 is 359 and comes with steel turnbuckles. And then if you run MM requires another 100+ in part for durability and weight. AE probably has the cheapest oem option parts out there. lol, you people crack me up.