Team Associated RC10 B5m Mid-Motor & Rear Motor Thread
|
|||
#8566
#8567
#8570
Tech Master
iTrader: (21)
Anyone else have a lot of play in the rear arms, specifically the rear inner hinge pins? Mine had almost 1mm of slop on each side. I made some shims out of factory team ball stud washers (didn't have any plastic washers) but wow that was a lot of play in the rear. Otherwise the kit has been great so far.
Here's an example.
#8571
Tech Elite
iTrader: (67)
I did until one of the team drivers showed me that you need to install the optional 3x8mm set screws in each of the hubs and the front caster blocks. You need six screws total. Takes away most of the slop. Magical...
Here's an example.
Here's an example.
most people put a 1mm shim at the back of the arm to remove this.
i used team l*** shock spacers.
http://www.amain.com/product_info.ph...ter-Set-TLR-22
#8572
Tech Master
iTrader: (44)
This is an awesome shot Cherry. That's your computer / smartphone wallpaper material right there
http://2wdmod.files.wordpress.com/2014/04/img_6621.jpg
http://2wdmod.files.wordpress.com/2014/04/img_6621.jpg
#8573
Black!!!!!!!!! Oh man please tell me this is the new trend And the brass rear suspension mounts if it helped the car like the rocketrc 22 mount does that would be sweet
#8574
I need to get those set screws but there not in stock. I added a 1mm spacer to my rear arms as well.
#8575
Tech Elite
iTrader: (54)
http://www.mcmaster.com/#91390a101/=rl9j6s
#8576
Tech Adept
iTrader: (13)
A buddy of mine stopped by A main hobbies on the way to somewhere else and found that they had everything in stock for the b5. Nothing updated on the web site but it's all there. Sad! He picked up a bunch of stuff for us but I thought I'd pass on the info. If you want parts go there if you can.
#8577
Tech Elite
iTrader: (54)
A buddy of mine stopped by A main hobbies on the way to somewhere else and found that they had everything in stock for the b5. Nothing updated on the web site but it's all there. Sad! He picked up a bunch of stuff for us but I thought I'd pass on the info. If you want parts go there if you can.
#8579
Tech Champion
iTrader: (22)
We were discussing this. I think you'll see this more for guys running on lower bite tracks, but of course nothing is certain.
Adding weight to my older mid motor cars in the same areas made them quite better when grip was down.
I probably won't run my cars much this summer, but I'll end up getting a set and tossing them in my box.
TBH, by the time I really run 10th scale again, I'll likely be buying the FT cars and then have 4 cars sitting here :LOL:
Adding weight to my older mid motor cars in the same areas made them quite better when grip was down.
I probably won't run my cars much this summer, but I'll end up getting a set and tossing them in my box.
TBH, by the time I really run 10th scale again, I'll likely be buying the FT cars and then have 4 cars sitting here :LOL: