rickster

its not so much the flat arms that make the difference in feel.. its the shock tower.. the holes are about 1 hole in from the mid tower.. and also a different height.. that's why they run the flat arms with them... you can get kind of the same feel going to the very inside hole on tower with gullwing.. but even more so with the b5 tower and arms... it smooth's the steering. The gullwing is more aggressive as its like standing your shocks up more position wise. you have to use the flat arms because the towers are different heights.

ok.. funny thing..... the b5m seems to work even better with the b5 arms front and rear.. and the b5 seems to run better with the b5m front and rear..

on the b5 if you run the b5m rear arms they have just a tad less sweep, but when you switch them around so you can run them on the b5 the left arm on right side actually gives more sweep and increases traction.. same with front arms... the gull wings make the front of b5 more aggressive.... lol

but it does make for great tuning options for tracks.. but it can get confusing.

Wild Cherry

I bet most here sure won't be using any of your off topic comments..

Just the other night watched a B5m with gulls Tq against the guys with the flats.

He was using flats before..

johnny boy

iTrader: (328)

can you shoot me a pm for some reason I cant get pm's started with people.

johnny boy

iTrader: (328)

will you sale me your flat stuff then george

splking1

What was his setup in the front? Only reason I switched mine was cause I broke a gold wing arm and still can't find a replacement.

rickster

personally I like the feeling of the gullwing arms and b5m tower better.. I like quick steering though... I like that feeling of my car reacting when I turn the wheel.. the flat arms used on super high bite then I think the smoother may be better as you have so much steering anyway that way. but that's just me.

msedsp

iTrader: (9)

I just bought 2, only have one race day on them but they seemed to be very good soo far. Running B5R 17.5 blinky.

gporta77

iTrader: (58)

subscribed

suby723

iTrader: (21)

But would he have tq'd either way? Once you own the car you will understand..

caprezmikeb

iTrader: (26)

Nice lol

rickster

suby... exactly...lol

rickster

hey trixter91... yes that's how I run them.. use a 10mm ballstud instead of the 6mm.. use a 3mm locknut and your all set. :-)

BillPear

iTrader: (3)

I wonder why Steven cut out all the chassis braces and doesn't have a battery strap? Weight (intentional) a minute, he runs mod, and WEIGHT IS IMPORTANT!

SilentHunter

Amen suby! Couldn't have said it any better...

JiuHaWong

Flex maybe? I recall reading that he ran his centro in a similar fashion.