TOO-TALL

iTrader: (2)

I would also like to know where you got the shims

steelers82

iTrader: (8)

I was wondering if any one could give me some advice...Im thinking of convering my b5m into rear motor but still on the fence about it.I was wondering what front and rear arms to run for rear motor? I run on medium bite clay,also can I get away with running the same front end geometry as far as kick up angle and spindles? Also are the rear toe and anti squat the same and can I run my factory team hinge pin holders from my b5m on the rear motor?

iScream

iTrader: (12)

Sure, I saw the question and answer, which you modified in your "quote".

I should have asked my real question more clearly though and shouldn't have replied back while my wife was standing in front of me waiting to leave for dinner.

But mschumi101 answered it pretty well.

Wildcat1971

iTrader: (84)

the answer is everywhere. in short, the kit bearing suck and the front spindles and insert suck. I am using ceramic bearings in one of my cars and is had been smooth for months. well about a year now. all my non ceramics get crunchy after a month or so.

Wildcat1971

iTrader: (84)

so, the entire front clip will work fine in either car. the rear clip is different including the C and D mounts. as far as what arms? I use the RM arms on both the RM and MM cars.

steelers82

iTrader: (8)

cool thank you very much for your help.

barry1me

iTrader: (9)

I broke my stock battery strap tonight at track...looking to upgrade and was considering the Schelle one...anyone running that one? Is that the best one?

Wildcat1971

iTrader: (84)

I loke the exotek or plan b racing strap.

Cridd

iTrader: (16)

I run the Schelle, like that it goes around my motor/ESC wires a little better.

fastatfrog

Took mine for its first day out and loved it. It just drove so well







Thanks to Froggy for taking the pics

air8

iTrader: (7)

I like that battery brace. Gotta see if the LHS can get that.

Socket

iTrader: (61)

How did you manage to break a battery strap?

Mason

This ought to be entertaining..

bds81175

iTrader: (20)

My son ran an entire race with the strap in place but the hold down nuts not there. I'm more surprised that he DIDN'T break the brace.

Wildcat1971

iTrader: (84)

the schelle does NOT have a back stop. if you move the pack forward, you will need foams. Poorly thought out. If you want an adjustable strap, I would get the Plan B Racing strap. Otherwise, get the exotek.