Hot Bodies D413 1/10 4WD Buggy
#3616
Its weird the item numbers from RcPlanet and HPI are swapped...
HPI:
#113071 - D413 SPUR GEAR (72T)
#112963 - GEARBOX SHIM SET (6PCS)
RcPlanet:
Hot Bodies Spur Gear 72T D413 HBS112963
Hot Bodies Gearbox Shim Set D413 (6) HBS113071
I just ordered a spur (this page http://www.rcplanet.com/Hot_Bodies_S.../hbs112963.htm) and a few other parts. Hopefully I get a spur and not a shim set!
HPI:
#113071 - D413 SPUR GEAR (72T)
#112963 - GEARBOX SHIM SET (6PCS)
RcPlanet:
Hot Bodies Spur Gear 72T D413 HBS112963
Hot Bodies Gearbox Shim Set D413 (6) HBS113071
I just ordered a spur (this page http://www.rcplanet.com/Hot_Bodies_S.../hbs112963.htm) and a few other parts. Hopefully I get a spur and not a shim set!
#3618
Tech Master
iTrader: (18)
Its weird the item numbers from RcPlanet and HPI are swapped...
HPI:
#113071 - D413 SPUR GEAR (72T)
#112963 - GEARBOX SHIM SET (6PCS)
RcPlanet:
Hot Bodies Spur Gear 72T D413 HBS112963
Hot Bodies Gearbox Shim Set D413 (6) HBS113071
I just ordered a spur (this page http://www.rcplanet.com/Hot_Bodies_S.../hbs112963.htm) and a few other parts. Hopefully I get a spur and not a shim set!
HPI:
#113071 - D413 SPUR GEAR (72T)
#112963 - GEARBOX SHIM SET (6PCS)
RcPlanet:
Hot Bodies Spur Gear 72T D413 HBS112963
Hot Bodies Gearbox Shim Set D413 (6) HBS113071
I just ordered a spur (this page http://www.rcplanet.com/Hot_Bodies_S.../hbs112963.htm) and a few other parts. Hopefully I get a spur and not a shim set!
#3619
Team Tekin
iTrader: (18)
Its weird the item numbers from RcPlanet and HPI are swapped...
HPI:
#113071 - D413 SPUR GEAR (72T)
#112963 - GEARBOX SHIM SET (6PCS)
RcPlanet:
Hot Bodies Spur Gear 72T D413 HBS112963
Hot Bodies Gearbox Shim Set D413 (6) HBS113071
I just ordered a spur (this page http://www.rcplanet.com/Hot_Bodies_S.../hbs112963.htm) and a few other parts. Hopefully I get a spur and not a shim set!
HPI:
#113071 - D413 SPUR GEAR (72T)
#112963 - GEARBOX SHIM SET (6PCS)
RcPlanet:
Hot Bodies Spur Gear 72T D413 HBS112963
Hot Bodies Gearbox Shim Set D413 (6) HBS113071
I just ordered a spur (this page http://www.rcplanet.com/Hot_Bodies_S.../hbs112963.htm) and a few other parts. Hopefully I get a spur and not a shim set!
My packing slip from HB/HPI Direct shows #113071 as the part number for the D413 Spur gear.
#3621
Tech Regular
iTrader: (10)
I was going to also order the spur from RC Planet but noticed the switch. Tower initially made the same mistake. For Tower at least, 113071 is the correct part number. Initially they were going to send me shims after they corrected the description but didn't update my order. I hope RC Planet does send you guys the spur. Let us know.
#3622
#3625
Tech Adept
my front sway bar keeps coming undone on one side or another....so after my second run today i noticed when it came off, instantly i had more body roll and close to traction roll but i was also faster and liked the increased steering (my fronts are going bald so lack of steering could be easily fixed) so i just leave it unhooked on one side....if i dont like how it drives i will mount it up again
at norcal hobbies i was able to get fairly consistent around 16.6-16.7 ...with occasional 16.6-16.1 ....ohh and i hit 15.9 once...and a 16 flat once...its been a while since i have run through that many battery packs...my guess is about 15 packs in the d413...and 7-8 in SCTE2...all indoor with 90F and my guess is 90% humidity..it was torture !
i have had a bunch of parts on order from tower...and it seems like every day something arrives....so parts are definatly coming in on a more regular basis now.
my spur fix is still holding up just great, i got a spare one now as i machined up two, on request, but only one got shipped out
if your in limbo due to chewed up spur...i still have one..and could have it mailed out tomorrow....better to do the fix than have it collect dust
ohh and while talking of spurs....if your center diff leaks the spur will get misted with diff oil, and collect dirt, making for a grinding paste....keep the spur dry and clean...motor spray it and use a tooth brush and use a dentist tool to pick out crud !
i am still in love with my d413 its awesome, and takes abuse like no other 4wd buggy i have seen, and the cat sx3 was pretty damn good !
i got the SMC 4600mah shorty's, and holy moly its powerfull....i got the 4300mah too its good, and better than gens ace 4200.....but the gens ace "softness" makes it easier to drive, and i can hit almost same lap times as with top shelf SMC (btw smc, reedy, team powers, rcking...all the same stuff inside, from the same factory, SMC just gives you the better deal)
dstreelm, dont worry about you spur...i will fix it up should something happen to it, you will only be down until i'm home where i can fix it...24hr max...nahh make it 18hr for you LOL
at norcal hobbies i was able to get fairly consistent around 16.6-16.7 ...with occasional 16.6-16.1 ....ohh and i hit 15.9 once...and a 16 flat once...its been a while since i have run through that many battery packs...my guess is about 15 packs in the d413...and 7-8 in SCTE2...all indoor with 90F and my guess is 90% humidity..it was torture !
i have had a bunch of parts on order from tower...and it seems like every day something arrives....so parts are definatly coming in on a more regular basis now.
my spur fix is still holding up just great, i got a spare one now as i machined up two, on request, but only one got shipped out
if your in limbo due to chewed up spur...i still have one..and could have it mailed out tomorrow....better to do the fix than have it collect dust
ohh and while talking of spurs....if your center diff leaks the spur will get misted with diff oil, and collect dirt, making for a grinding paste....keep the spur dry and clean...motor spray it and use a tooth brush and use a dentist tool to pick out crud !
i am still in love with my d413 its awesome, and takes abuse like no other 4wd buggy i have seen, and the cat sx3 was pretty damn good !
i got the SMC 4600mah shorty's, and holy moly its powerfull....i got the 4300mah too its good, and better than gens ace 4200.....but the gens ace "softness" makes it easier to drive, and i can hit almost same lap times as with top shelf SMC (btw smc, reedy, team powers, rcking...all the same stuff inside, from the same factory, SMC just gives you the better deal)
dstreelm, dont worry about you spur...i will fix it up should something happen to it, you will only be down until i'm home where i can fix it...24hr max...nahh make it 18hr for you LOL
#3626
Tech Master
iTrader: (27)
Join Date: Dec 2003
Location: im 4rm a far away place called 1st
Posts: 1,849
Trader Rating: 27 (100%+)
Can anyone confirm what manufactur springs ty runs? It sounds like kyosho . And what shock package are my fellow high bite clay guys running?
#3628
Tech Fanatic
iTrader: (3)
Just got off the phone with Tower. They just received some more D413 kits, and they said I will be getting one this time ! Holding my breath...
What servo horn (offset) are most people using? Post a couple close pics ?
Thanks
What servo horn (offset) are most people using? Post a couple close pics ?
Thanks
Last edited by Matt :-); 07-15-2014 at 06:11 AM.