Hot Bodies D413 1/10 4WD Buggy
#2926
Tech Elite
iTrader: (68)
Contact Marcus at www.rcshox.com he either has or will very have his two stage pistons for the d413 shocks. Down here in Houston are tracks are outdoors, dusty and rough; his pistons work like a champ.
#2927
Thanks for the suggestion. Before I go that route I really want to make the pistons included in the kit work. I'm new to 4wd so just trying to understand what would work. I'm also trying to understand why some setups don't use a front sway bar and others don't use a rear. What the reason behind this.
I have 4x1.2 with 30wt in the back with the stock springs and I drilled the blanks as 2x1.4 with 35wt for the front with a slight stiffer spring then the one that came with the kit.
setup is evolving but I like it.
I use the thickest front swaybar and no rear swaybar
#2928
Tech Initiate
Something better is around the corner!
What a blessing in disguise! I've had the HB D413 backordered for 2 months now and was getting frustrated to see the dates getting pushed back further each month. It all worked out because I found out that something better will be coming out soon. I cancelled my HB D413 backorder today with Tower. The D413 is a formidable machine but I don't like the way they jerked around potential customers. Also, the buggy that will be out shortly has had the chance to compile data on the D413 and is more flexible to varying track conditions.
#2929
What a blessing in disguise! I've had the HB D413 backordered for 2 months now and was getting frustrated to see the dates getting pushed back further each month. It all worked out because I found out that something better will be coming out soon. I cancelled my HB D413 backorder today with Tower. The D413 is a formidable machine but I don't like the way they jerked around potential customers. Also, the buggy that will be out shortly has had the chance to compile data on the D413 and is more flexible to varying track conditions.
#2930
Tech Elite
iTrader: (68)
I drive on bumpy low grip out door.
I have 4x1.2 with 30wt in the back with the stock springs and I drilled the blanks as 2x1.4 with 35wt for the front with a slight stiffer spring then the one that came with the kit.
setup is evolving but I like it.
I use the thickest front swaybar and no rear swaybar
I have 4x1.2 with 30wt in the back with the stock springs and I drilled the blanks as 2x1.4 with 35wt for the front with a slight stiffer spring then the one that came with the kit.
setup is evolving but I like it.
I use the thickest front swaybar and no rear swaybar
#2931
Tech Regular
What a blessing in disguise! I've had the HB D413 backordered for 2 months now and was getting frustrated to see the dates getting pushed back further each month. It all worked out because I found out that something better will be coming out soon. I cancelled my HB D413 backorder today with Tower. The D413 is a formidable machine but I don't like the way they jerked around potential customers. Also, the buggy that will be out shortly has had the chance to compile data on the D413 and is more flexible to varying track conditions.
#2933
Tech Fanatic
iTrader: (3)
What a blessing in disguise! I've had the HB D413 backordered for 2 months now and was getting frustrated to see the dates getting pushed back further each month. It all worked out because I found out that something better will be coming out soon. I cancelled my HB D413 backorder today with Tower. The D413 is a formidable machine but I don't like the way they jerked around potential customers. Also, the buggy that will be out shortly has had the chance to compile data on the D413 and is more flexible to varying track conditions.
#2934
#2935
What a blessing in disguise! I've had the HB D413 backordered for 2 months now and was getting frustrated to see the dates getting pushed back further each month. It all worked out because I found out that something better will be coming out soon. I cancelled my HB D413 backorder today with Tower. The D413 is a formidable machine but I don't like the way they jerked around potential customers. Also, the buggy that will be out shortly has had the chance to compile data on the D413 and is more flexible to varying track conditions.
#2937
Tech Rookie
#2938
nope, never seen those