Hot Bodies D413 1/10 4WD Buggy
#1487
Tech Elite
iTrader: (32)
#1491
Tech Regular
iTrader: (8)
to order:
Call Tower:
217-398-3636
Stock number:
HBSC2723
If you are not a Super saver club member, sign up when you are on the phone...
and use the Coupon Code:
014AF. ($41 off $410 order)
Then later (once you are a "super saver member") call back, and change your coupon code to:
014KW ($60 off $400 order)
Call Tower:
217-398-3636
Stock number:
HBSC2723
If you are not a Super saver club member, sign up when you are on the phone...
and use the Coupon Code:
014AF. ($41 off $410 order)
Then later (once you are a "super saver member") call back, and change your coupon code to:
014KW ($60 off $400 order)
#1492
Tech Addict
edit 2: Ty was running Kyosho XGear orange/yellow for ROAR nats, IFMAR worlds, and the Cactus Classic. I can't find an actual rating for Kyosho Super Hard/Orange fronts, but Kyosho Hard/Yellow fronts are 75g/mm which is way heavier than the heaviest front HB spring. Kyosho Hard/Yellow rears are 47g/mm, which also heavier than all the HB springs...
For the Reedy race he ran Kyosho yellow/white, which are 75g/mm and 43.6g/mm respectively, which again, isn't covered with the spread of HB springs. Am I missing something with the HB spring ratings?
source: http://www.tytessman.com/setups/d413-setups.php
http://www.petitrc.com/reglages/Univ...pringChart.htm
http://www.hpiracing.co.uk/piw.php?partNo=113063
For the Reedy race he ran Kyosho yellow/white, which are 75g/mm and 43.6g/mm respectively, which again, isn't covered with the spread of HB springs. Am I missing something with the HB spring ratings?
source: http://www.tytessman.com/setups/d413-setups.php
http://www.petitrc.com/reglages/Univ...pringChart.htm
http://www.hpiracing.co.uk/piw.php?partNo=113063
#1493
Tech Addict
#1494
Tech Addict
Hi too all,
this is my first post here.
I'm sorry for my english, but i hope everyone unterstand me.
My question is, whats the size of the thread of the turnbuckles?
3mm?
3,5mm? or
4mm?
And which company does produce titanium turnbuckles?
Or will there some produced by HB in the future?
Thanks an greetings
Martin
this is my first post here.
I'm sorry for my english, but i hope everyone unterstand me.
My question is, whats the size of the thread of the turnbuckles?
3mm?
3,5mm? or
4mm?
And which company does produce titanium turnbuckles?
Or will there some produced by HB in the future?
Thanks an greetings
Martin
#1496
not sure where those Kyosho spring rates came from but i never fully trust what other companies publish as their spring rates. i have a full set of the Kyosho springs and physically measured their rates. not a theoretical calculation but an actual measurement. for Kyosho orange fronts i got 62.8, Kyo orange rears i measured 39.7. then of course the yellow and other springs are softer.
#1498