XRAY XB9E Official Thread - they did it :)
#1246
Tech Regular
How are you getting side by side lipos in the XB9E? And yes 360oz is good for a buggy.
#1247
Would I know if I messed something up? Would there be power loss? Overheating? Rite now it runs very strong and cool.
#1248
#1249
Moving forward; would I know if I messed something up? Would there be power loss? Overheating? Rite now it runs very strong and cool.
#1250
Tech Regular
#1252
#1253
Tech Master
iTrader: (4)
Okay 1 more quick question!
I bought some new lipos a few weeks ago and have run them only one time. I had my esc lvc set at the preset for 4s which I now know is quite a bit too low then what people recommend. And I always drive my car back to me when the lvc kicks in so thats some more voltage drop (not much) but still. Its an rx8 set at 4s lvc. Should I be worried about damage to the cells?
I bought some new lipos a few weeks ago and have run them only one time. I had my esc lvc set at the preset for 4s which I now know is quite a bit too low then what people recommend. And I always drive my car back to me when the lvc kicks in so thats some more voltage drop (not much) but still. Its an rx8 set at 4s lvc. Should I be worried about damage to the cells?
Arite thanks guys you are helping me get my ride dialed in and ready to hit the track this weekend wahoooooo!!
Time to switch gears on ya I took the front end bell of my motor last night and noticed the screws ive been using for the motor mount are a bit too long. A couple of the screws penetrated through the so called "safety" spacer ring that sits in front of the copper coils to prevent this very issue i imagine LOL. It looks like they just penetrated a little bit and may have been in contact with the copper coils. Can this cause operating issues? performance or degradation issues? Man am I kickin myself...
Time to switch gears on ya I took the front end bell of my motor last night and noticed the screws ive been using for the motor mount are a bit too long. A couple of the screws penetrated through the so called "safety" spacer ring that sits in front of the copper coils to prevent this very issue i imagine LOL. It looks like they just penetrated a little bit and may have been in contact with the copper coils. Can this cause operating issues? performance or degradation issues? Man am I kickin myself...
#1254
Tech Regular
Jesus, "that guy" would smack you around for being an idiot. Ask the question on the correct thread jackass.
#1255
Easy to talk on the internet isn't it?
So we got 2 guys being "that" guy. It got even worse.
So we got 2 guys being "that" guy. It got even worse.
#1256
Tech Regular
And you still being an idiot, nobody wants to see this on here, ask your questions in the correct thread.
If you want to be an idiot take it to pm. I will gladly send you my address or stop by yours if you would like to eat thru a straw for 6 weeks.
If you want to be an idiot take it to pm. I will gladly send you my address or stop by yours if you would like to eat thru a straw for 6 weeks.
#1257
Your full of it. How do you know it wouldnt be you on your ass. Dont be stupid and stop being that guy tough guy
#1258
Tech Regular
That's just what happened to all the Haji I've ever had to face and I'm sure they are more skilled than yourself. Anyway seriously go away and ask whatever dumb questions you have on the correct thread, obviously I'm not the only one that thinks this way.
#1259
Nice response, but probably less skilled though.
#1260
The funny thing is you guys start policing now??? LOL after I already asked all those questions before? should have done that much sooner dont ya think? You guys need to work on your thread policing skills if you're gonna do it. Can't believe you guys didnt start policing in the beginning..... but you are now?- meaning its way too late to be "those guys" its even worse now.
And wittyname must be pretty bored to list all my posts!! you must be a special kind. Thanks for taking that time to do that. Maybe rc tech has an award for you. hahahahahahahahahah joke. Was completely useless and a waste of your time because I already told you I notice everytime LOL just didnt think I was dealing with such police. They are electric 1/8 scale related questions so thats good enough, get it? i would hope so.
And wittyname must be pretty bored to list all my posts!! you must be a special kind. Thanks for taking that time to do that. Maybe rc tech has an award for you. hahahahahahahahahah joke. Was completely useless and a waste of your time because I already told you I notice everytime LOL just didnt think I was dealing with such police. They are electric 1/8 scale related questions so thats good enough, get it? i would hope so.