TLR 8IGHT E 3.0 THREAD
#2566
Since the smc he recommended is even lighter (by 10grams) and has the ability to move front or rear because it's a short pack, it sounds like a better tuning option don't you think? Plus I'll still get the brass weight that helps with steering.
#2568
Hey guys, just finished my build and I didn't see anywhere in the manual where they have the recommended pinions like all the other kits. I'm running the tekkin 2050kv motor.
Thanks Merse
Thanks Merse
#2569
I will try an answer, but I'm not sure it's all right.
It seems that the front arms are at 10° ( chassis plate and gearboxes / A and B plates)
If you had the front 15° hubs, we have a total of 25° for the front caster.
If you change the front and rear hinge pin bushings you will change from 23° to 27°.
The set up in the manual shows 2 inserts "1" in front and rear, the front in up position and the rear in down position. This set up gives you the maximum of 27°, and the other combinations are in the manual, page 16.
For example, if you reverse the "1" bushings positions, compare to the manual set up, you will have a total of 23°, the minimum.
I hope you will understand my poor English.
Bye !
#2571
Hi InARush,
I will try an answer, but I'm not sure it's all right.
It seems that the front arms are at 10° ( chassis plate and gearboxes / A and B plates)
If you had the front 15° hubs, we have a total of 25° for the front caster.
If you change the front and rear hinge pin bushings you will change from 23° to 27°.
The set up in the manual shows 2 inserts "1" in front and rear, the front in up position and the rear in down position. This set up gives you the maximum of 27°, and the other combinations are in the manual, page 16.
For example, if you reverse the "1" bushings positions, compare to the manual set up, you will have a total of 23°, the minimum.
I hope you will understand my poor English.
Bye !
I will try an answer, but I'm not sure it's all right.
It seems that the front arms are at 10° ( chassis plate and gearboxes / A and B plates)
If you had the front 15° hubs, we have a total of 25° for the front caster.
If you change the front and rear hinge pin bushings you will change from 23° to 27°.
The set up in the manual shows 2 inserts "1" in front and rear, the front in up position and the rear in down position. This set up gives you the maximum of 27°, and the other combinations are in the manual, page 16.
For example, if you reverse the "1" bushings positions, compare to the manual set up, you will have a total of 23°, the minimum.
I hope you will understand my poor English.
Bye !
#2572
Does anyone know where I can purchase multicolored esc 10 or 12 guage wire set? Should I use 10 or 12?
#2573
TQWire has great wire!
#2574
Amain hobbies has multi color wire sets by Tekin, viper, Novak, and others...in many different wire gauges, colors, and lengths.
www.amain.com
www.amain.com
#2575
anybody know if there is a new body coming out like the nitro version
#2576
#2580