Go Back  R/C Tech Forums > General Forums > Electric Off-Road
TLR TEN-SCTE 2.0 Kit Thread >

TLR TEN-SCTE 2.0 Kit Thread

Like Tree10Likes

TLR TEN-SCTE 2.0 Kit Thread

Old 11-25-2013, 12:20 PM
  #5686  
Tech Initiate
iTrader: (3)
 
Join Date: Oct 2013
Posts: 39
Trader Rating: 3 (100%+)
Default

Originally Posted by 87MagnumII
Get the tekno center drive shafts. The Losi ones snap the pin in the Cvd.

Are the 1.0 and 2.0 the same shafts? Tekno does not list them as being 2.0 compatible but I may be wrong. Trying to rush an order in today due to my pins being worn on the front shaft at the center diff.
JS70 is offline  
Old 11-25-2013, 12:29 PM
  #5687  
Tech Elite
Thread Starter
iTrader: (13)
 
Join Date: May 2006
Posts: 3,557
Trader Rating: 13 (100%+)
Default

Originally Posted by JS70
Are the 1.0 and 2.0 the same shafts? Tekno does not list them as being 2.0 compatible but I may be wrong. Trying to rush an order in today due to my pins being worn on the front shaft at the center diff.
The front and rear are the same, just put in reverse order.
hacker07 is offline  
Old 11-25-2013, 05:00 PM
  #5688  
Tech Initiate
iTrader: (3)
 
Join Date: Oct 2013
Posts: 39
Trader Rating: 3 (100%+)
Default

Originally Posted by hacker07
The front and rear are the same, just put in reverse order.
Thanks Ryan.

Can anyone say for sure the Tekno front / rear or axle shaft kit even worth changing to on the 2.0? I have had no problems yet and may just be able to get by replacing the pin once in awhile and have a set of spare Losi shafts as that would let all of the parts be interchangeable.
JS70 is offline  
Old 11-26-2013, 06:47 AM
  #5689  
Tech Elite
iTrader: (8)
 
Join Date: Jul 2004
Posts: 2,637
Trader Rating: 8 (100%+)
Default

Originally Posted by JS70
Thanks Ryan.

Can anyone say for sure the Tekno front / rear or axle shaft kit even worth changing to on the 2.0? I have had no problems yet and may just be able to get by replacing the pin once in awhile and have a set of spare Losi shafts as that would let all of the parts be interchangeable.
The tekno center cvd's are very well constructed, and I haven't had any problems with them. But, I haven't had a problem with the losi ones either. I would buy the teknos again without a doubt.
071crazy is offline  
Old 11-27-2013, 06:16 PM
  #5690  
Tech Elite
iTrader: (58)
 
frito's Avatar
 
Join Date: Apr 2009
Posts: 2,058
Trader Rating: 58 (98%+)
Default

Just put a neW one together, however my center spur doesn't want to fit right..it wobbles.ive took,off and put back on 3 times and every time the same ,don't see no,bad spots or anything
frito is offline  
Old 11-27-2013, 07:02 PM
  #5691  
Tech Master
iTrader: (41)
 
Join Date: Nov 2009
Posts: 1,230
Trader Rating: 41 (100%+)
Default

lay the spurgear on something flat.does it look warped this way?
rifraf is offline  
Old 11-27-2013, 07:19 PM
  #5692  
Tech Master
iTrader: (1)
 
BmainStar's Avatar
 
Join Date: Nov 2010
Location: pullin in,ca.
Posts: 1,993
Trader Rating: 1 (100%+)
Default

Originally Posted by 071crazy
The tekno center cvd's are very well constructed, and I haven't had any problems with them. But, I haven't had a problem with the losi ones either. I would buy the teknos again without a doubt.
I have had failures with both,its a( wear part)..Had trouble with the set screws stripping on the Tekno`s may have been a bad batch ,don't know .I run the losi`s and keep spares .
Any one running the new MIP torque rods ?Do vthey feel too stiff? Thanx>>>> RACE ON !!
BmainStar is offline  
Old 11-27-2013, 07:51 PM
  #5693  
Tech Elite
iTrader: (45)
 
goehm's Avatar
 
Join Date: May 2010
Location: Northern VA
Posts: 2,765
Trader Rating: 45 (100%+)
Default

Originally Posted by frito
Just put a neW one together, however my center spur doesn't want to fit right..it wobbles.ive took,off and put back on 3 times and every time the same ,don't see no,bad spots or anything
If it doesn't look warped (using the test previously mentioned), make sure you're tightening the screws in a star pattern. Very similar to tightening the lugs on a real car wheel.
goehm is offline  
Old 11-27-2013, 07:53 PM
  #5694  
Tech Addict
iTrader: (4)
 
Panda-PR's Avatar
 
Join Date: Aug 2010
Location: Puerto Rico
Posts: 634
Trader Rating: 4 (100%+)
Default

Parma rally body on my 2.0!! Just have to raise the body post and remove the rear bumper.

Panda-PR is offline  
Old 11-27-2013, 08:05 PM
  #5695  
Tech Regular
iTrader: (7)
 
kingofcool999's Avatar
 
Join Date: Apr 2013
Location: Lincoln NE
Posts: 462
Trader Rating: 7 (100%+)
Default

Originally Posted by BmainStar
Any one running the new MIP torque rods ?Do vthey feel too stiff? Thanx>>>> RACE ON !!
I've got a set on mine. Fit great, look great, don't really notice a difference vs. stock, except the MIP's don't break.
kingofcool999 is offline  
Old 11-27-2013, 08:07 PM
  #5696  
Tech Elite
iTrader: (7)
 
Tim Garland's Avatar
 
Join Date: Aug 2009
Location: Mayfield KY
Posts: 2,892
Trader Rating: 7 (100%+)
Default

Originally Posted by Panda-PR
Parma rally body on my 2.0!! Just have to raise the body post and remove the rear bumper.

That's cool! Really like the paint.
Tim Garland is offline  
Old 11-27-2013, 08:35 PM
  #5697  
Tech Master
iTrader: (7)
 
Join Date: Jul 2012
Posts: 1,629
Trader Rating: 7 (82%+)
Default

ive got two ?? were did you get it and how did you fit it on to the scte
RavensNightFury is offline  
Old 11-27-2013, 08:45 PM
  #5698  
Tech Elite
iTrader: (58)
 
frito's Avatar
 
Join Date: Apr 2009
Posts: 2,058
Trader Rating: 58 (98%+)
Default

I'm going take apart again tomm and I will lay flat and see, what size are the center diff screws, gonna try find some with bigger head,I'm scared of them stripping out
frito is offline  
Old 11-28-2013, 07:12 AM
  #5699  
Tech Elite
iTrader: (33)
 
rcgod's Avatar
 
Join Date: Apr 2002
Location: Blackfoot Idaho.
Posts: 3,463
Trader Rating: 33 (100%+)
Default

Originally Posted by frito
I'm going take apart again tomm and I will lay flat and see, what size are the center diff screws, gonna try find some with bigger head,I'm scared of them stripping out
http://www.amainhobbies.com/product_...d-Hex-Screw-10
rcgod is offline  
Old 11-28-2013, 09:09 AM
  #5700  
Tech Addict
iTrader: (4)
 
Panda-PR's Avatar
 
Join Date: Aug 2010
Location: Puerto Rico
Posts: 634
Trader Rating: 4 (100%+)
Default

Originally Posted by RavensNightFury
ive got two ?? were did you get it and how did you fit it on to the scte
http:// http://www.rcboca.com/catalo...ult/?q=par1239

Just trim along the lines, take the rear bumper off so it fit easier. Haven't tried the rear bumper again to see if it fits.
Originally Posted by Tim Garland
That's cool! Really like the paint.
Thanks
Panda-PR is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.