Esc acting like its overheating but not
#1
Esc acting like its overheating but not
I have a Castle Mamba Max Pro ESC with a Tenshock 4600 attached. Running it on a 2 cell 50c Lipo in a 4wd SCT. After about 3 min run time the truck shuts down with a yellow/red flashing light indicating overheating. After temping the ESC and motor they are 110 and 125 respectfully. I changed the ESC out with another one and same problem. Could the problem be with the motor? I have a 15 tooth pinion which is what is recommended. Any help would be great.