Xray XB4 thread
2016 xb4
Hey guys , maybe someone can help me out here .. I've been building the above buggy since 2016 .. Anyway i'm finally setting the body on there and I noticed the servo horn ( expert servo) scrapes the body. Anyone have an idea why theres a clearance problem?
Tks Jimmy
Hey guys , maybe someone can help me out here .. I've been building the above buggy since 2016 .. Anyway i'm finally setting the body on there and I noticed the servo horn ( expert servo) scrapes the body. Anyone have an idea why theres a clearance problem?
Tks Jimmy
Tech Champion
iTrader: (259)
There's no official shim. I used a lower control arm spacer from my XB8 vehicle. Basically, it's a 3x8mm plastic spacer. Adds 2mm to the front body mount. Anything like that will work.
Tech Fanatic
iTrader: (11)
I just pulled the trigger on a 2018 XB4, thanks for the info Saturday Russ R @ Dirtburner's
2016 mod
Grinding noise coming from one of the diffs or drive line ? before i tear into this ,, is there a weak spot that i can focus on ? tks
Grinding noise coming from one of the diffs or drive line ? before i tear into this ,, is there a weak spot that i can focus on ? tks
Tech Elite
iTrader: (33)
do you know where its coming from.. front or rear.. i would check the diff ring and pinion gears..
looks like its # 304932 which i believe are the small satellite plastic gears?
HEY, I got to thank Brian from X-ray for taking care of this Today . Big tks ,,, It goes a long way & means a ton !!
Tks , Jimmy
HEY, I got to thank Brian from X-ray for taking care of this Today . Big tks ,,, It goes a long way & means a ton !!
Tks , Jimmy
Last edited by SerpJimmy; 05-16-2018 at 02:25 PM.
Tech Initiate
Xb4 2018 setup
Anyone have a go to setup for high bite smooth clay? Thanks
Tech Master
iTrader: (8)
Here's what I've been running for my 16 XB4 and would think would carry over to the 18 as well.
Tech Master
iTrader: (8)
Here's what I've been running for my 16 XB4 and would think would carry over to the 18 as well.
Tech Initiate
Tech Master
iTrader: (8)
I've been using this on high bite as well and works good with the 180s as well
I looked at my high bite setup that I last used and is close to same setup, the high bite track I was running on had a lot of sweeping turns
so I used different insert in the C & D block, but when the layout changed to a tighter track with more turns I used the setup that I posted.
I looked at my high bite setup that I last used and is close to same setup, the high bite track I was running on had a lot of sweeping turns
so I used different insert in the C & D block, but when the layout changed to a tighter track with more turns I used the setup that I posted.
2016 XB4 / tekin Gen3 6.5 - Where now eating front Diff 304932 Large #5 bevel gears like candy.. Thinking of changing to steel Satelite gears & Alum pinset? Possibly getting some flex ? IDK?
Tech Initiate
Low bite dirt
What center diff oil are you guys running on lower bite dirt. Tends to me a little lose and dusty. Thanks
Does X-ray have a gearing chart for the xb4 with a 5.5t and 13.5t motors? Thx
Last edited by KyoshoSC; 06-01-2018 at 09:20 PM. Reason: Typo
Tech Adept
i have a bunch of wheels/tires for my other 4mod and am picking up an 18-xb4, does anyone know if the TLR 22-4 wheels fit?