Xray XB4 thread
#1442
Tech Fanatic
iTrader: (33)
New Parts for the XB4 from Diggity Designs
Diggity Designs is proud to announce the release of their 4mm replacement towers for the XB4 with material added at the "breaking" point of the OEM towers. Some pics below and a link to the XB4 product page.
http://www.diggitydesigns.com/products_Xray_XB4.html
http://www.diggitydesigns.com/products_Xray_XB4.html
#1443
Diggity Designs is proud to announce the release of their 4mm replacement towers for the XB4 with material added at the "breaking" point of the OEM towers. Some pics below and a link to the XB4 product page.
http://www.diggitydesigns.com/products_Xray_XB4.html
http://www.diggitydesigns.com/products_Xray_XB4.html
#1444
7 year old Malin practices before finals on Sunday at round #3 of the 2012/2013 JConcepts Challenge.
She's only been driving R/C cars since beginning of November and this is her second race (first was the PetitRC Race in mid January) with her XB4 she got for Christmas.
Here's a short clip for starters
Bent
She's only been driving R/C cars since beginning of November and this is her second race (first was the PetitRC Race in mid January) with her XB4 she got for Christmas.
Here's a short clip for starters
Bent
#1446
Tech Elite
iTrader: (43)
Gigabytes are awesome. Slightly more fwd grip than the proline holeshot rubber and a bit longer lasting. HB and Proline are the only two rubber compounds which hook up crazy well on our clay track for 2wd at least. Jconcepts green/gold a close second, and followed by AKA SS. Panther S/SS Clay all don't work well without juicing. AKA lasts the longest though. Indoor wet clay which get a black groove by the time the bmains are done!
#1447
Seeing her race is even more impressive though......navigating through traffic like it wasn't even there.
I'll have some videos from qualifying where she won all of her heats (except for the first when her new Reedys decided to give in) and lapping everyone in doing so.
She qualified 6th for the 3 x A-finals (out of 20 starters) and ended up 5th with just a couple of tenths from the 4th spot
Bent
#1452
Tech Adept
#1453
Tech Adept
#1454
Tech Elite
iTrader: (93)
Diggity Designs is proud to announce the release of their 4mm replacement towers for the XB4 with material added at the "breaking" point of the OEM towers. Some pics below and a link to the XB4 product page.
http://www.diggitydesigns.com/products_Xray_XB4.html
http://www.diggitydesigns.com/products_Xray_XB4.html
#1455
Tech Elite
iTrader: (15)
yea, it's pretty clean stuff. he's just snaking some extra wire around it doesn't hurt anything, just takes time, leave the top plate off and spend a couple hours freakin around with it, tuck it in, use the kit wire holders and all the other clean wiring tricks. mine is the opposite, battery to esc right over the top. do not use the "wiring thread" as an example there is some horrid stuff there