172LikesKyosho Ultima RB6 & RB6.6 Car Thread
12-21-2016, 08:46 AM - Wikipost
|
|||
|
|||
|
10-13-2014, 07:51 PM
I'm convinced mm will be better on my local low/medium bite clay indoor track with right setup. Love the corner speed it possesses. Interested in trying a rear stabilizer (sway) kit. Would a soft sway bar create more corner traction, if not.. What it's purpose? Thanks in advance.
10-13-2014, 08:53 PM
Could someone in this tread do me a favor? I would like to know the shock shaft lengths and diameter. Also the piston exact diameter in mm for the rb6. I would like to find out if I can use the MIP bypass1 shock valves that fits the rb6 for my schumacher KF/KR.
10-13-2014, 09:59 PM
Would anyone want to do a partial trade for a B44.2?
10-14-2014, 06:41 PM
Whats everyone using as a shock package oil weight springs and pistons? Right now im using 1.6 2 hole int he front 1.7 2 hole inthe rear 35 wt front and rear
10-15-2014, 08:34 PM
What upgrades would you guys say are needed right out of the box?
10-15-2014, 09:04 PM
10-15-2014, 09:37 PM
10-16-2014, 07:33 AM
Hey guys I broke an aluminum steering bell crank last night and cant get a new one before saturdays race how bad are the plastic ones I still have the ones from my kit just wondering if they are worth trying?
10-16-2014, 07:49 AM
They are bad 
You could maybe use the plastic arm as the one that is not attached to the servo link. It will be less abused.
Drive carefully too
You could maybe use the plastic arm as the one that is not attached to the servo link. It will be less abused.
Drive carefully too
10-16-2014, 08:19 AM
Does anyone know the amp draw of a 7.5 under high bite conditions ?
10-16-2014, 08:54 AM
I ran the stock bellcranks with the alum. ackerman rack for well over a year and a half with out issues. Don't see any reason they wouldn't work. I just switched to the alum. bellcranks though, but kept the plastic kit ones as back ups.
10-16-2014, 08:58 AM
I have had thecar since it came out and have only broken the stock plastic steering 2 times. It's plenty tough tough enough the only upgrades I have are the adjustable hangers and al .5 rear hubs.
10-16-2014, 10:23 AM
i only have the exotek slider..the arms are stock plastic..had this setup for a full season..i have the full aluminum kit for when these break..i believe the plastic was updated from the 1st batch years ago
10-16-2014, 11:11 AM
Does the Exotek slider accomplish the same feeling as the Aluminum steering rack?
Is $500 for a roller to much? 3 weekends old with almost all the upgrades you can get on it.
Is $500 for a roller to much? 3 weekends old with almost all the upgrades you can get on it.
Last edited by 3srcracing; 10-16-2014 at 11:42 AM.
10-16-2014, 12:01 PM
most only use the alumium rack for strength..not sure on the feel? $500 is a lot for a used roller..350 tops for a car with all the options..i only want 250 for mine,another $100-150 and you can have most of the option stuff..you mainly need rear hubs..if you race stock the mip aluminum pucks