172LikesKyosho Ultima RB6 & RB6.6 Car Thread
12-21-2016, 08:46 AM - Wikipost
|
|||
|
|||
|
10-22-2012, 02:23 PM
#1922
pls add the 3m part number as well. I try to buy from amazon to avoid the rc tax like AE and upgrade puts on their chassis protectors 
. I used to use this roll before skateboarding slip tapehttp://www.amazon.com/SLIP-TAPE-1HAA...ords=slip+tape. But it cannot be reused and is not very compliant around little protrusions like screws which are not quite flush.
10-22-2012, 02:53 PM
#1923
I dont disagree that it is thin. Its just the fact that I'm one of 5 people running the car at my local track and I havent seen this happen yet. I just dont want the people who are interested in the RB6 to get the wrong impression about the quality of the K car.
10-22-2012, 03:28 PM
#1927
Wow that sucks! I'm going to come up with some sort of skid plate for mine. Also if anyone is looking for another option for a body, I'm using the proline bulldog for the durango DEX410. It's a near perfect fit. I will try to post pics as soon as I figure it out Im new to this forum.
10-22-2012, 04:13 PM
#1928
Tech Apprentice
I also noticed after a couple of race days my chassis looks like the pictures posted . Its like its a perfect square that needs cut out, kind of how the B4 tranny sits in rear t plate.
I've made a few changes to my setup. http://www.petitrc.com/setup/kyosho/...ceway20121013/ I went to 2.5mm on bump steer washers on spindle. That seems to be the zero bump steer mark. White springs in front, # 2 hole on front camber link, and added another 1mm limiter for a total of 2mm in rear shocks. This made the car easier to drive with faster lap times. If any of you guys try this setup, give me feed back to make better.
I've made a few changes to my setup. http://www.petitrc.com/setup/kyosho/...ceway20121013/ I went to 2.5mm on bump steer washers on spindle. That seems to be the zero bump steer mark. White springs in front, # 2 hole on front camber link, and added another 1mm limiter for a total of 2mm in rear shocks. This made the car easier to drive with faster lap times. If any of you guys try this setup, give me feed back to make better.
Last edited by msandman; 10-22-2012 at 04:56 PM.
10-22-2012, 04:35 PM
#1929
i got my kyosho wides on ebay. cheap price and was here in 4 bussiness days from japan.
10-22-2012, 04:38 PM
#1930
msandman, link isnt working for me..
10-22-2012, 04:44 PM
#1931
"By the way, in a pinch, you can always order the strc ones off amain. They are cheaper, and should work just as well. Plastic bushings still needed."
strc doesnt make the wide rf blocks i emailed them and as of right know they have no plans on making them, just a heads up
strc doesnt make the wide rf blocks i emailed them and as of right know they have no plans on making them, just a heads up
10-22-2012, 04:49 PM
#1932
Tech Apprentice
10-22-2012, 04:54 PM
#1933
Tech Apprentice
I could be wrong but I think the kit comes with two rf, the thicker updated one and the old one. I believe the old one will still work.
10-22-2012, 04:55 PM
#1935
