Kyosho Ultima RB6 & RB6.6 Car Thread
|
|||
#318
Depending on what your set up is (mid ship or rear mount) you can take out some parts.
I am not going down to the nuts and bolts.
#320
Tech Elite
iTrader: (6)
Here is the list I came up with. It is quite long.
Basically every part number from UM700-UM728 is required for rear motor RB6 except...
UM720
UM722 - UM726
These parts are for the mid-motor and would replace the following rear motor specific parts if you wanted a mid-motor car instead....
UM705
UM706
UM708
I have no idea on prices. I am not going to look that part up.
The body is UMB03 and the wing is UM727. The decals if you care are UMD02. The part number UM719 is the 1 piece shock caps. They are not needed really, but would be required to have a "complete" RB6
You will also need UM561. These are the rear outer hinge pins for the RB6 and are from the RT5/SC-R.
Basically every part number from UM700-UM728 is required for rear motor RB6 except...
UM720
UM722 - UM726
These parts are for the mid-motor and would replace the following rear motor specific parts if you wanted a mid-motor car instead....
UM705
UM706
UM708
I have no idea on prices. I am not going to look that part up.
The body is UMB03 and the wing is UM727. The decals if you care are UMD02. The part number UM719 is the 1 piece shock caps. They are not needed really, but would be required to have a "complete" RB6
You will also need UM561. These are the rear outer hinge pins for the RB6 and are from the RT5/SC-R.
Last edited by Rfury; 08-09-2012 at 12:36 PM.
#321
Here is the list I came up with. It is quite long.
Basically every part number from UM700-UM728 is required for rear motor RB6 except...
UM719
UM720
UM722 - UM726
These parts are for the mid-motor and would replace the following rear motor specific parts if you wanted a mid-motor car instead....
UM705
UM706
UM708
I have no idea on prices. I am not going to look that part up.
The body is UMB03 and the wing is UM727. The decals if you care are UMD02.
You will also need UM561. These are the rear outer hinge pins for the RB6 and are from the RT5/SC-R.
Basically every part number from UM700-UM728 is required for rear motor RB6 except...
UM719
UM720
UM722 - UM726
These parts are for the mid-motor and would replace the following rear motor specific parts if you wanted a mid-motor car instead....
UM705
UM706
UM708
I have no idea on prices. I am not going to look that part up.
The body is UMB03 and the wing is UM727. The decals if you care are UMD02.
You will also need UM561. These are the rear outer hinge pins for the RB6 and are from the RT5/SC-R.
#323
ohh.. the rb6 kit comes with the white slipper sheet (UM516) instead of the Red one (UM571)
And not the vented slipper disk too.
And not the vented slipper disk too.
#326
Moderator
iTrader: (470)
Join Date: Nov 2009
Location: North Carolina by way of SoCal!
Posts: 4,785
Trader Rating: 470 (100%+)
There is a pic on Kyosho's facebook page of him working on the car.
#327
Moderator
iTrader: (470)
Join Date: Nov 2009
Location: North Carolina by way of SoCal!
Posts: 4,785
Trader Rating: 470 (100%+)
#329
Tech Addict
Car is not available yet but editable setup sheet is, check petit
#330
Tech Master
iTrader: (21)
No. My best guess is that guys run long antenna tubes so they can see their cars better when they're either far away, behind something, or in a ditch and can't be seen from the drivers' stand. That's why I do it, anyway.