4-Pole SC motor thoughts....
#17
Tech Adept
iTrader: (1)
I ran the Pro4 4000 indoor last winter...beautiful, grunty motor. I thought very linear motor, geared it to moon...even ran timing on it.
Switched the Pro 4 4600 for outdoors...motor is softer down low than the 4000 but man what a top end charge...ran cool and hard...killed the sensor board in it 2 weekend's ago and it's currently @ Tekin getting looked at...
Currently running the Trinity ReVtech 4800. I'm one tooth lower than what I ran the 4600 at. Temps @ 175 6 min vs the 4600 @ 140. Also sucks about another 1000 mah per race than the 4600. I had to turn current limit down from 75% to 65% and take the default 10 deg out of the RX8 to get this thing thru a race. Top end is about even to the 4600 with the smaller pinion. On the plus side, it is smoother...but the Tekin will be going back in when it gets back...
Switched the Pro 4 4600 for outdoors...motor is softer down low than the 4000 but man what a top end charge...ran cool and hard...killed the sensor board in it 2 weekend's ago and it's currently @ Tekin getting looked at...
Currently running the Trinity ReVtech 4800. I'm one tooth lower than what I ran the 4600 at. Temps @ 175 6 min vs the 4600 @ 140. Also sucks about another 1000 mah per race than the 4600. I had to turn current limit down from 75% to 65% and take the default 10 deg out of the RX8 to get this thing thru a race. Top end is about even to the 4600 with the smaller pinion. On the plus side, it is smoother...but the Tekin will be going back in when it gets back...
#18
Tech Fanatic
iTrader: (6)
I ran the Pro4 4000 indoor last winter...beautiful, grunty motor. I thought very linear motor, geared it to moon...even ran timing on it.
Switched the Pro 4 4600 for outdoors...motor is softer down low than the 4000 but man what a top end charge...ran cool and hard...killed the sensor board in it 2 weekend's ago and it's currently @ Tekin getting looked at...
Currently running the Trinity ReVtech 4800. I'm one tooth lower than what I ran the 4600 at. Temps @ 175 6 min vs the 4600 @ 140. Also sucks about another 1000 mah per race than the 4600. I had to turn current limit down from 75% to 65% and take the default 10 deg out of the RX8 to get this thing thru a race. Top end is about even to the 4600 with the smaller pinion. On the plus side, it is smoother...but the Tekin will be going back in when it gets back...
Switched the Pro 4 4600 for outdoors...motor is softer down low than the 4000 but man what a top end charge...ran cool and hard...killed the sensor board in it 2 weekend's ago and it's currently @ Tekin getting looked at...
Currently running the Trinity ReVtech 4800. I'm one tooth lower than what I ran the 4600 at. Temps @ 175 6 min vs the 4600 @ 140. Also sucks about another 1000 mah per race than the 4600. I had to turn current limit down from 75% to 65% and take the default 10 deg out of the RX8 to get this thing thru a race. Top end is about even to the 4600 with the smaller pinion. On the plus side, it is smoother...but the Tekin will be going back in when it gets back...
#19
#24
Who distributes Hobbywing?
#26
#27
Tech Master
iTrader: (3)
www.teamcrc.com is also an option on the hobbywing stuff. You will find it cheaper at falcon sekido though.
#28
We can end the debate right now, just get the sensored tenshock sc411 5200kv and u will not want for any more motor!!! Its 550 4 pole, theres nothing on the track that can touch it