skim1420

Hi guys, I just finished building my SC10 4x4, and and finding that the left front wheel is seized up. It turns about 1/5 of a turn in either direction.

Before I tear apart the whole thing, any clues on what I should be looking for?

Thanks.

Deja Vu

iTrader: (11)

Check the CVD pin. You may have to shim the wheel pin to reduce slop.

weavty1

iTrader: (12)

Remove the CVD and then check for rolling resistance on that wheel you're having problems with. Keep narrowing it down to the culprit.

Hack-N-Slash

iTrader: (1)

I had the same problem with mine and it ended up being a worn out plastic hex. Installed the aluminum locking hexes and having seen the problem since.