iTz Nicholas72

iTrader: (19)

If it comes on the 24th that would be perfect. That's my birthday!!!111!!

Quad Racer 34

iTrader: (4)

As of right now, 8/20.

elecRC23

iTrader: (2)

can someone post a link to the 1mm spacers on here, can't seem to find them.

Casper

iTrader: (34)

Alum hexes are supposed to be in with the rest of the 22 SCT parts. There is no current date showing in the system so not exactly sure where they are but they should be here with the kits.

murky123

why not use the alu hexes of the 22 buggy ?

Casper

iTrader: (34)

Not the same offset.

bobf24

iTrader: (28)

here you go . . .

http://www.rctech.net/forum/10892945-post1.html

murky123

? huh ?

a hex that add's 0,75 on a 22 buggy will also add 0,75 on the 22SCT right?

maybe Im getting it wrong, but the hex of the 22 and 22sct are both 12mm and they both add 0,75

( im talking about the +0,75mm alu hex, I could have talked about the +1,5mm or 0mm )

When Im wrong, please explain it to me

Grandturk

iTrader: (5)

The hex is 12mm on its face - as in for 12mm hex wheels. The width (offset) of the hexes are different from buggy to SCT.

Casper

iTrader: (34)

Problem is where you start from to add .75mm is different. The Std hex for the 22 is not as wide as the std hex for the 22 SCT or the 22 T!

These are both the std offset for these two cars hexes. Both are 12mm hex.
22
http://www.tlracing.com/Products/Def...ProdID=TLR2930

22 SCT
http://www.tlracing.com/Products/Def...ProdID=TLR2933

tonyxcom

iTrader: (1)

I sure hope the truck and new iPhone don't come out the same week. I needs me some LTE too.

Looks like a late September ship date for the iPhone, hope the 22SCT isn't delayed that long. I've seen stuff get help up at port or in customs plenty of times.

iTz Nicholas72

iTrader: (19)

Same here man. September 12th event for Apple and if it's anything like their previous releases 2-3 weeks and it will be time to camp outside of Verizon haha.

ScottKelly911

iTrader: (9)

Hey Kyle, I listed the links to both the RCRD as well as the Exotek shims on the first page. They're in the "Aftermarket" parts area. Dont feel bad for missing it, I just added them just now. I did have a link to the rcrd ones but it was in the build tips, now it's in both areas.

elecRC23

iTrader: (2)

ok cool, thanks

elecRC23

iTrader: (2)

so I have an 8.5t revtech motor that I'm gonna use for this truck, as well as a savox 1258 servo. I was wondering what you guys would recommend as far as an esc. I'm leaning either towards the Orion r10 pro ( because I already have one and know the characteristics of it) or the tekin rs pro (because I've never had anything tekin before and it is smaller). Anything will help. Thanks!!!!