TLR 22SCT Thread (Check First Page for FAQ & INFO)
#5026
Tech Rookie
1 two 2mm per side
#5027
Tech Master
iTrader: (3)
but they are shipping them as soon as they get them in for me,
one of my LHS' may have a set. I just want to get this thing built!!!!
I should have asked if they could send the 22RTR caps*
Last edited by AndrewTom; 12-31-2012 at 02:32 PM. Reason: Language
#5029
Tech Rookie
Lol… Ya know? It’s not easy going threw life this stupid – but somehow I manage, Thanks…
#5030
Tech Master
iTrader: (3)
I called my LHS, and he has a bleeder cap set in stock, he put it behind the counter for me!
now I have to fork over 18 bucks for shocks caps,
EDIT: I went to my LHS, showed him the defective cap, he handed me a set of new caps and I am going to bring the one horizon sends in the coming weeks.
he also had Exotek 1mm shims, so now I have the joy of tearing it apart to them in!
A big thanks to BTRC for supporting me.
now I have to fork over 18 bucks for shocks caps,
EDIT: I went to my LHS, showed him the defective cap, he handed me a set of new caps and I am going to bring the one horizon sends in the coming weeks.
he also had Exotek 1mm shims, so now I have the joy of tearing it apart to them in!
A big thanks to BTRC for supporting me.
Last edited by AndrewTom; 12-31-2012 at 02:36 PM. Reason: update
#5033
hey guys, iam a freelance artist and i just ventured out putting some of my art on chassis skins. check them out on my fb page "twistedskins"
here are some of my losi ones :
http://www.facebook.com/media/set/?s...8529877&type=3
here are some of my losi ones :
http://www.facebook.com/media/set/?s...8529877&type=3
#5036
Yeah i have to admit this setup didnt work for me either.I ran on a small clay med grip track blown out in a couple spots.Its a tight technical track with a couple doubles and a triple.The previously had the 25/5 team setup on it and was doing really well just was looking for a little more (as always).I was running ss wishbones at first and it was like i was on ice in the rear and the front seemed really lazy.Then i threw some green barcodes on and it wa a little better but no where near the orig team setup.I understand this setup isnt for everyone and every track and i appreciate the help and figured id give a lil feedback from the northeast.
Compared to my usual set-up, which isn't too different from the kit set-up (I run rear hubs full forward; rear shocks more reclined), I felt like the new setup didn't have as much grip. I've got two trucks, so I was able to do a side-by-side comparison. Raising the ride height about 1 mm seemed to help.
Couple caveats: The track was REALLY dusty. And there were two things from the new setup that I didn't do -- I didn't have the gold washers to adjust the steering ball cup, and I didn't use sway bars, since traction was hard to find.
Also not 100% sure if I had the battery in the right location... I normally run the battery tray full forward. With the new setup, I moved it to the next location back. I wasn't sure if it belonged there, or back TWO positions from full forward.
#5037
#5038
Tech Elite
iTrader: (45)
hey guys, iam a freelance artist and i just ventured out putting some of my art on chassis skins. check them out on my fb page "twistedskins"
here are some of my losi ones :
http://www.facebook.com/media/set/?s...8529877&type=3
here are some of my losi ones :
http://www.facebook.com/media/set/?s...8529877&type=3
#5039
Tech Prophet
iTrader: (34)
I ran the new setup on a track similar to the one Losi57 is describing... just slightly larger. I know he runs mod; I run 17.5 blinky. A lot of us in this class have been running Megabites.
Compared to my usual set-up, which isn't too different from the kit set-up (I run rear hubs full forward; rear shocks more reclined), I felt like the new setup didn't have as much grip. I've got two trucks, so I was able to do a side-by-side comparison. Raising the ride height about 1 mm seemed to help.
Couple caveats: The track was REALLY dusty. And there were two things from the new setup that I didn't do -- I didn't have the gold washers to adjust the steering ball cup, and I didn't use sway bars, since traction was hard to find.
Also not 100% sure if I had the battery in the right location... I normally run the battery tray full forward. With the new setup, I moved it to the next location back. I wasn't sure if it belonged there, or back TWO positions from full forward.
Compared to my usual set-up, which isn't too different from the kit set-up (I run rear hubs full forward; rear shocks more reclined), I felt like the new setup didn't have as much grip. I've got two trucks, so I was able to do a side-by-side comparison. Raising the ride height about 1 mm seemed to help.
Couple caveats: The track was REALLY dusty. And there were two things from the new setup that I didn't do -- I didn't have the gold washers to adjust the steering ball cup, and I didn't use sway bars, since traction was hard to find.
Also not 100% sure if I had the battery in the right location... I normally run the battery tray full forward. With the new setup, I moved it to the next location back. I wasn't sure if it belonged there, or back TWO positions from full forward.
#5040
Can someone get me the thickness of the shock shafts in MM please?
Thanks.
Thanks.