shagino

iTrader: (57)

Are you planning on upgrading to the B chassis stuff? Most of the after market stuff won't work with it.

victor0502

iTrader: (9)

at the moment do not buy 2 dest210 my nephew brought the B chassis but not mine I recommend that you wait for the upgrade of the B chassis

shagino

iTrader: (57)

Not following you here.

rcmania74

iTrader: (60)

What Shock Weight (Oil) Are Most People Running... I Use Associated Oil... Which Springs.... thanks

Slash and Burn

iTrader: (24)

Hit me up on Sat. I'll show you my setup.

Slash and Burn

iTrader: (24)

Is anybody running the low roll center (LRC) rear hangars and/or the lowered rear shock tower? If so, I'd like to hear what you think.

platgof

iTrader: (4)

Stadium Truck is finally back on at my track. Some guys went out and got some, so I will be able to race again, yeah! Now I need the 2wd to pick back up.

IVAN RM

iTrader: (25)

Parts for sale: http://www.rctech.net/forum/r-c-item...arts-sale.html

platgof

iTrader: (4)

I popped off my rear r/h arm during the A main, bummer. I guess I need to up grade to the new chassis. What really ticks me off is this is the second time and both were real easy hits, what a joke.

lappdawg27

iTrader: (11)

Did the arm pop out of the holder? This is a common problem on the standard (type A) chassis. You need to get at least an aluminum RR hanger. This is pretty much a must-fix. I also recently got the Exotek RF hanger as well, but haven't run it yet.

The type B chassis I think fixes this, as it is not quite as flexible, although they do make aluminum hangers foir that chassis also.

Other than replacing the stock plastic hangers the truck has been nearly bulletproof for me. I think I broke one arm and had 1 or 2 ballcups pop off this year, and I race every weekend.

IVAN RM

iTrader: (25)

Selling my dest210 great offer: http://www.rctech.net/forum/r-c-item...l#post12832678

lappdawg27

iTrader: (11)

Question for anybody with the Exotek hangers. Are the Exotek suspension bushings better than the Durango ones? I rebuilt my truck last month and had a lot of slop at the rear inner hinge pin, even with new pins & arms. It seems like the "balls" that the hinge pins fit into are the culprits. The Exotek ones look the same, but do they fit in the Exotek hangers better? After one race the slop is a lot worse.

mattjk

iTrader: (82)

I have a brand new rtr roller. no electronics. comes type a chassis installed and a complete type b chassis kit. Has the blue painted rtr body and stock wheels and tires. $135 shipped.

ekt

iTrader: (4)

I don't have the Exotek hangers but it sounds like your hinge pins might need a bit of shimming to seat the balls into the hanger better.
http://www.team-durango.com/in-the-p...rticle_id=6804

lappdawg27

iTrader: (11)

I may have to try that...I have the arm shimmed at the RF hanger so I don't have front-to-rear play, maybe I'll move those to the back and see what happens. It feels like I have side-to-side play in the ball opening itself, inside the RR hanger.

I'll experiment...thanks for the info.