need some advice regarding a conversion
#1
need some advice regarding a conversion
ok short story...i couple of years ago i bought an hpi mt2 18ss (nitro) and ran it at the local track, i lost interest in it so it sat in the closet for about 3-4 years. i assume the engine is done but thats beside the point. i want to go electric so i dont have to deal with the nitro mess (but i do miss the roar of the engine)
So i dug it up and decided to do a electric conversion. so i need some advice regarding the spur and pinion gear. what combo should i get. for the mt2, the spur gear is rather limited if you go with the slipper clutch (which i intend to do). right now i have a 52t but i think it can go as low as 47t (please correct me if I'm wrong). the motor im using is a hobbyking 1900kvm brushless motor. For the batteries, ill be using some turnigy 2s and 3s lipos
any suggestions would be greatly appreciated. tia
So i dug it up and decided to do a electric conversion. so i need some advice regarding the spur and pinion gear. what combo should i get. for the mt2, the spur gear is rather limited if you go with the slipper clutch (which i intend to do). right now i have a 52t but i think it can go as low as 47t (please correct me if I'm wrong). the motor im using is a hobbyking 1900kvm brushless motor. For the batteries, ill be using some turnigy 2s and 3s lipos
any suggestions would be greatly appreciated. tia