Team Associated RC8.2e Thread
#7173
Tech Apprentice
iTrader: (2)
RC8B3
When is the e-conversion coming out?
What do yall think about associated following the trend and going with pillow balls?
I was kind if hoping AE would be the inovators rather than followers. Im not a brand fanatic or pureist in the slightest, but Im still buying associated as long as they keep there price point lower than the competition and parts availability at my LHS.
What do yall think about associated following the trend and going with pillow balls?
I was kind if hoping AE would be the inovators rather than followers. Im not a brand fanatic or pureist in the slightest, but Im still buying associated as long as they keep there price point lower than the competition and parts availability at my LHS.
#7174
Tech Initiate
10 packs With my 8.2rtr.. Seems I need to pick up some spare parts
#7177
Tech Initiate
I apologize if this is a double post but a search for LED and lights came up with nothing.
I do some semi often night oval running. There are overhead lights but I want to get a few added to the car just to see it better in the dim spots. Can anyone recommend some that works well with this (Awesome) buggy?
I do some semi often night oval running. There are overhead lights but I want to get a few added to the car just to see it better in the dim spots. Can anyone recommend some that works well with this (Awesome) buggy?
#7178
Tech Initiate
I got the car up and running last night, the bearing had thrown a few bals, but both gears were good once cleaned, Wonder how they held up, lots of metal spoon inside.. Took it to the local track and raced a mp9e that were popping Axels left and right... whats With those cars and Axels..
I lost my steering Block bushing and screw for not paying attention once changing packs.. it had backed out so I lost it on the other run . Other than that I had a blast ..
Video :
https://www.youtube.com/watch?v=kIcW...5FFovQ&index=1
I lost my steering Block bushing and screw for not paying attention once changing packs.. it had backed out so I lost it on the other run . Other than that I had a blast ..
Video :
https://www.youtube.com/watch?v=kIcW...5FFovQ&index=1
Last edited by maxmekker; 04-23-2015 at 06:19 AM.
#7179
Tech Adept
I got the car up and running last night, the bearing had thrown a few bals, but both gears were good once cleaned, Wonder how they held up, lots of metal spoon inside.. Took it to the local track and raced a mp9e that were popping Axels left and right... whats With those cars and Axels..
I lost my steering Block bushing and screw for not paying attention once changing packs.. it had backed out so I lost it on the other run . Other than that I had a blast ..
Video :
https://www.youtube.com/watch?v=kIcW...5FFovQ&index=1
I lost my steering Block bushing and screw for not paying attention once changing packs.. it had backed out so I lost it on the other run . Other than that I had a blast ..
Video :
https://www.youtube.com/watch?v=kIcW...5FFovQ&index=1
#7180
Tech Initiate
thanks for the info Freez. I saw dollarhobbies had a good price on that FT kit you mentioned, probably gonna pick it up, Got hold of the lost screw+bushing, and also the rear FT dampers came in the mail today.. Only it was missing spacer and rubber o rings....
#7181
Tech Initiate
Would love to get some feedback on shock tuning for this track ( video link)
https://www.youtube.com/watch?v=kIcWi74Qs7Q
any shock pistons 'hop op' I should pick up to fit the FT shocks I'm running on my rtr.
Running FT shocks ( With included piston) With Kyosho LB springs 35 oil as of now .
it feels tad nose Heavy( With the rb7000mah pack) and would like to try and get the back part les jumpy over the smal bumps
thanks
https://www.youtube.com/watch?v=kIcWi74Qs7Q
any shock pistons 'hop op' I should pick up to fit the FT shocks I'm running on my rtr.
Running FT shocks ( With included piston) With Kyosho LB springs 35 oil as of now .
it feels tad nose Heavy( With the rb7000mah pack) and would like to try and get the back part les jumpy over the smal bumps
thanks
#7182
Tech Initiate
Can anyone recommend some good bodies for the car? The kit one is nice but I was wanting something with a little more of a unique look to it.
#7183
Tech Adept
I have just about every FT part installed on my 8.2e rtr. None of the electronics are original either. I have been running this thing for several months. I still can't seem to get it dialed in right. It seems loose a in and out of turns and when I try to get on it after straightening out, the rear end break loose and the car gets squirrly. I feel like I am on ice skates and drift racing almost all the time.
My track is medium traction, tight, outdoor...
My diff are 5/5/5 right now. Someone told me to try and change the front diff oil to 7K. I have a couple extra diffs. I put 7K in one of them but, haven't installed it yet.
Any other ideas of what I can do to get this thing dialed in?
My track is medium traction, tight, outdoor...
My diff are 5/5/5 right now. Someone told me to try and change the front diff oil to 7K. I have a couple extra diffs. I put 7K in one of them but, haven't installed it yet.
Any other ideas of what I can do to get this thing dialed in?
#7184
Tech Adept
iTrader: (4)
I have just about every FT part installed on my 8.2e rtr. None of the electronics are original either. I have been running this thing for several months. I still can't seem to get it dialed in right. It seems loose a in and out of turns and when I try to get on it after straightening out, the rear end break loose and the car gets squirrly. I feel like I am on ice skates and drift racing almost all the time.
My track is medium traction, tight, outdoor...
My diff are 5/5/5 right now. Someone told me to try and change the front diff oil to 7K. I have a couple extra diffs. I put 7K in one of them but, haven't installed it yet.
Any other ideas of what I can do to get this thing dialed in?
My track is medium traction, tight, outdoor...
My diff are 5/5/5 right now. Someone told me to try and change the front diff oil to 7K. I have a couple extra diffs. I put 7K in one of them but, haven't installed it yet.
Any other ideas of what I can do to get this thing dialed in?
#7185
Tech Adept
I got a 17T pinion, Tenshock x812 1900kv, and Hobbywing 150a blue esc