TLR 22T Thread
02-29-2012, 06:40 AM
#2596
Originally Posted by Briguy
Per Jconcepts -
"I prefer to mount them with the big connected Y to the outside for normalblue and black groove conditions. If the track has a lot of rubber on it or extremely high grip I would look at running them the other direction"
"I prefer to mount them with the big connected Y to the outside for normalblue and black groove conditions. If the track has a lot of rubber on it or extremely high grip I would look at running them the other direction"
02-29-2012, 08:15 AM
#2597
In all reality I tried the both ways on the truck and didnt feel a diffrence.
02-29-2012, 08:17 AM
#2598
Has anyone found ceramic bearing kits for reasonable prices?
02-29-2012, 11:54 AM
#2600
Tech Regular
Originally Posted by easye
Has anyone found ceramic bearing kits for reasonable prices?
02-29-2012, 04:45 PM
#2602
Tech Regular
That's what I use revolutions all day. Save the 4 bucks and get 4 more revolutions. Lol. Rubber to the outside.
03-01-2012, 01:55 PM
#2603
Originally Posted by jsorwell
The issue is not with inline/trailing, but rather with the location of the ballstud. The truck spindles push it back further, to clear the wheel. They are not the same.
Last edited by skrichter; 03-04-2012 at 10:37 AM.
03-01-2012, 05:05 PM
#2604
Inline spindle with 3 dgree caster blocks.
03-02-2012, 04:04 AM
#2605
Originally Posted by north_dog
what other brands of battery holddowns are their than Exotek carbon fiber.
for the 22T and 22.
thanks
north_dog
for the 22T and 22.
thanks
north_dog
http://Www.teamsr.co/
03-02-2012, 04:36 PM
#2606
I am ordering the 22T kit this weekend and also stocking up on shock oils, what weight comes with the kit?
Thanks
Thanks
03-02-2012, 04:41 PM
#2607
Originally Posted by rider313
I am ordering the 22T kit this weekend and also stocking up on shock oils, what weight comes with the kit?
Thanks
Thanks
03-02-2012, 04:48 PM
#2608
Originally Posted by RB5SP
Sounds good, I'm gonna put the 7grams on the back to start and see how that feels thanks for the feedback.
03-03-2012, 09:08 AM
#2609
Tech Master
iTrader: (52)
Slipper Setting
I have my slipper set so my wheels lift about 2 inches or so off the ground when doing the bench test. I know some people dont use this method but i was just wondering for those who do use this method have you noticed you have to almost tighten down the slipper screw all the way down to achieve this setting. So I am curiouis has anyone had the same issue any feedback or suggestions would be great.
03-03-2012, 10:27 AM
#2610
Tech Regular
@RB5SP - Yes i noticed that as well, i went back to my normal way of setting up the slipper with a semi tight bench setting that i adjust on the track.
