Traxxas Slash 4x4 worthwhile mods!!
I'm just getting back in this sport after 15 yrs. I bought a traxxas slash ultimate and I'm looking for some worthwhile mods that make a difference on the dirt short course track. thanks.
|
Proline caliber wheels and tires.
King heads center bearing carrier with bigger bearing and order like 10 extra bearings and PACK THEN FULL OF GREASE the dirt will get in and finish them in a couple of races if u dont.. Pack them FULL pull the seals out and fillthem full of any kind of grease... Then get MIP heavy duty cvd set as the stock ones will last for a while but WILL die front and rear but especially the rear. remove the cover over the driveshaft it only keeps trapped dirt IN.. thats a good start glue in the upper shock bolts the drivers side ones come loose constantly even when u glue em. |
Originally Posted by xxfile
(Post 8670323)
Proline caliber wheels and tires.
King heads center bearing carrier with bigger bearing and order like 10 extra bearings and PACK THEN FULL OF GREASE the dirt will get in and finish them in a couple of races if u dont.. Pack them FULL pull the seals out and fillthem full of any kind of grease... Then get TEKNO F/R cvd set as the stock ones will last for a while but WILL die front and rear but especially the rear. remove the cover over the driveshaft it only keeps trapped dirt IN.. thats a good start glue in the upper shock bolts the drivers side ones come loose constantly even when u glue em. |
A Durango SC 4x4 :smile:
|
Originally Posted by Dlewis4
(Post 8670343)
A Durango SC 4x4 :smile:
|
Originally Posted by CORRRCR
(Post 8670360)
Im sure he would like to race this year:D
|
Thanks guys!!! keep them coming!!
already got the tires. will work on the bulkhead and bearing next. |
Aluminum shock caps, the plastic ones can strip off.
|
Here's a list of mods I'm doing w/my 4x4, all STRC parts: steering knuckles, FT,Rear shock towers, bellcrank, LW Center Main driveshaft, Alum.Motor mount and Motor plate, ft hub, C-hubs, Proline M3 tires, Tekno M6 ft,rear driveshafts. I might go with RPM Ft,Rear A-arms. Total about 240.
|
I forgot, maybe some Big Bore shocks.
|
Castle SCT 2400kv combo, motor mount, shock oils, diff oils, heat sink for motor, fan for ESC. LIPO LIPO LIPO"S!!!
|
I forgot all about diff and shock oils. I'm running the Castle SCT 3800. Has anybody thought of using a 4600 Mamba w/2s Lipo or is it too crazy?
|
|
thanks but I think I will wait to get a new motor esc setup till I can get over the cost of the car!! haha!! looks very fast though. got both fans and proline tires rpm a-arms front and back. working on the motor mount next. My wife just rolls her eyes now every time I come home with something new for the truck!!!
|
Originally Posted by Richbear2
(Post 8670890)
thanks but I think I will wait to get a new motor esc setup till I can get over the cost of the car!! haha!! looks very fast though. got both fans and proline tires rpm a-arms front and back. working on the motor mount next. My wife just rolls her eyes now every time I come home with something new for the truck!!!
|
All times are GMT -7. It is currently 05:02 AM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.