Go Back  R/C Tech Forums > General Forums > Electric Off-Road
Losi 1/10 TEN-SCTE ARR 4x4 Short Course Truck Thread >

Losi 1/10 TEN-SCTE ARR 4x4 Short Course Truck Thread

Like Tree9Likes

Losi 1/10 TEN-SCTE ARR 4x4 Short Course Truck Thread

Old 02-07-2011, 04:10 PM
  #796  
Tech Elite
Thread Starter
iTrader: (9)
 
SaladFork's Avatar
 
Join Date: Nov 2009
Location: Earth
Posts: 3,349
Trader Rating: 9 (100%+)
Default

Originally Posted by mojo 309 View Post
From what i am hearing the castle sidewinder sct combo works great in a 4x4 sc truck the neu-castle 3800 kv 1410 1y is plenty of motor but for it to work on the ten scte with the mod1 gearing you will need to get a bore reducer from robinson racing so you can fit the 5mm mod 1 pinion gear on the 3mm rotor of the neu castle 3800 motor is this true and if it is whats the part number for the robinson bore reducer? thank you
You can buy 3mm pinions which fit the 1/8" shaft on the Castle motor. http://www.nitrohouse.com/p20815/Hyp...duct_info.html

Here is the reducer - http://www.nitrohouse.com/p21725/Rob...duct_info.html
SaladFork is offline  
Old 02-07-2011, 04:10 PM
  #797  
Tech Fanatic
iTrader: (37)
 
S/X Runner's Avatar
 
Join Date: Feb 2010
Posts: 947
Trader Rating: 37 (100%+)
Default

Ohhhh, gotcha. I'm also ing
S/X Runner is offline  
Old 02-07-2011, 04:20 PM
  #798  
Tech Elite
Thread Starter
iTrader: (9)
 
SaladFork's Avatar
 
Join Date: Nov 2009
Location: Earth
Posts: 3,349
Trader Rating: 9 (100%+)
Default

Originally Posted by S/X Runner View Post
Ohhhh, gotcha. I'm also ing
Yea stupid me, honestly I was so ready to gtfo out of the track I'm actually surprised I dropped it in storage mode.
SaladFork is offline  
Old 02-07-2011, 04:25 PM
  #799  
Tech Master
iTrader: (5)
 
KingdomRacer's Avatar
 
Join Date: Feb 2010
Location: PA
Posts: 1,483
Trader Rating: 5 (100%+)
Default

Originally Posted by Jpm1 View Post
Woops, my bad your right 1409/1y is what I have on order, but it will be another 2 months yet, I thought of maybe a getting a tekin 550 in the mean time, still not sure which one of the 2 would be the better setup?
I would go with a 5.5 550 for inside and a 4.5 550 for outside and I know what you mean my Neu 1512/1.5Y/H/F took 5 months to get here and I just finished all the mods to it today. I just ordered a Neu 1506/1.5Y/H/F for my SCT and was told it won't be that long.

Originally Posted by mojo 309 View Post
From what i am hearing the castle sidewinder sct combo works great in a 4x4 sc truck the neu-castle 3800 kv 1410 1y is plenty of motor but for it to work on the ten scte with the mod1 gearing you will need to get a bore reducer from robinson racing so you can fit the 5mm mod 1 pinion gear on the 3mm rotor of the neu castle 3800 motor is this true and if it is whats the part number for the robinson bore reducer? thank you
CC will be coming out with a 5mm rotor option soon and will be available as an upgrade.
KingdomRacer is offline  
Old 02-07-2011, 05:11 PM
  #800  
Tech Elite
iTrader: (20)
 
slaytanic's Avatar
 
Join Date: Apr 2007
Posts: 2,171
Trader Rating: 20 (95%+)
Default

Castle is going to be offering option rotors with 5mm shaft for the 1410 and 1415 4 pole motors. Sweet!
slaytanic is offline  
Old 02-08-2011, 08:49 AM
  #801  
Tech Elite
iTrader: (13)
 
Join Date: May 2006
Posts: 3,553
Trader Rating: 13 (100%+)
Default

Looks like the trucks are still on schedule to ship on the 24th to dealers just as an FYI.
hacker07 is offline  
Old 02-08-2011, 09:10 AM
  #802  
Tech Addict
iTrader: (12)
 
Join Date: Jul 2010
Location: athens,al
Posts: 719
Trader Rating: 12 (100%+)
Default

very exciting and thanks for the update...if we ordered from horizion will they ship out to individuals the same day?

thanks again!
skyler hays is offline  
Old 02-08-2011, 09:15 AM
  #803  
Tech Fanatic
iTrader: (37)
 
S/X Runner's Avatar
 
Join Date: Feb 2010
Posts: 947
Trader Rating: 37 (100%+)
Default

Are there parts for this truck on the same ship?
S/X Runner is offline  
Old 02-08-2011, 09:54 AM
  #804  
R/C Tech Elite Member
 
JayL's Avatar
 
Join Date: Mar 2006
Location: Ca
Posts: 3,097
Default

are we talking about running this setup on 2s?

http://www.amainhobbies.com/product_...Package-3800kV
JayL is offline  
Old 02-08-2011, 10:08 AM
  #805  
Tech Master
iTrader: (5)
 
KingdomRacer's Avatar
 
Join Date: Feb 2010
Location: PA
Posts: 1,483
Trader Rating: 5 (100%+)
Default

Originally Posted by JayL View Post
are we talking about running this setup on 2s?

http://www.amainhobbies.com/product_...Package-3800kV
Yes for the motor and no for the esc but others are having success with the Sidewinder.
I personally recommend an MMP or RX8.
KingdomRacer is offline  
Old 02-08-2011, 10:18 AM
  #806  
Tech Adept
iTrader: (2)
 
Join Date: May 2010
Posts: 227
Trader Rating: 2 (100%+)
Default

You can use the bore reducers from ofna or robinson. I have tried the ofna ones and they work but once you put them on and blue loctite your pinon set screw it can be a bear to take off. I personally will not use a reducer again. Just buy the right pinons or upgrade to the cc 5mm shaft.
airboy808 is offline  
Old 02-08-2011, 10:22 AM
  #807  
Tech Regular
 
MarqueeRc's Avatar
 
Join Date: Aug 2010
Location: Miami, Flooo-Rida
Posts: 363
Default

Hey Hacker I think I saw you and Casper racing on Liverc.com at the O.C.R event sponsored by TLR...Congrats as you did really well in your respective classes...You ran the xxx sct in 2wd sct class right??Also, was that you also wheeling the new losi Ten-t 4wd sct in the 4wd sct class?? If so, you kicked azz with it and beat some pretty good drivers as one guy was posting (while watching the live feed of the race, he was claiming to know you and some other guy's that were running this past saturday night)...The Losi 4wd sct seemed to do especially well against the field while beating up the guys running ofna's sct's convincingly!!What other trucks's were running in that class???!If im not mistaken and you were running the new losi 4wd sct than I must say I am excited.....If that was any indication of what this vehicle has to offer than this platform should own the class!!By the way, they also were showing a live feed of the young Mr. Evans running his new losi 22 and basically owning and winning out the 2wd buggy class!!I must be clear as I am assuming those were the new Losi 4wd sct's you and casper were wheeling??Plz confirm??If so, Losi is making some waves!!

Last edited by MarqueeRc; 02-08-2011 at 10:33 AM.
MarqueeRc is offline  
Old 02-08-2011, 10:36 AM
  #808  
Tech Master
iTrader: (5)
 
KingdomRacer's Avatar
 
Join Date: Feb 2010
Location: PA
Posts: 1,483
Trader Rating: 5 (100%+)
Default

Originally Posted by airboy808 View Post
Just buy the right pinons or upgrade to the cc 5mm shaft.
This is going to be the best solution by far but it is not out yet.
KingdomRacer is offline  
Old 02-08-2011, 11:09 AM
  #809  
Tech Prophet
iTrader: (34)
 
Casper's Avatar
 
Join Date: Aug 2004
Location: Orange, Ca
Posts: 17,869
Trader Rating: 34 (100%+)
Default

Originally Posted by S/X Runner View Post
Are there parts for this truck on the same ship?
Yes all the parts are on the same boat. Cars and parts should all arrive at the same time.

Originally Posted by MarqueeRc View Post
Hey Hacker I think I saw you and Casper racing on Liverc.com at the O.C.R event sponsored by TLR...Congrats as you did really well in your respective classes...You ran the xxx sct in 2wd sct class right??Also, was that you also wheeling the new losi Ten-t 4wd sct in the 4wd sct class?? If so, you kicked azz with it and beat some pretty good drivers as one guy was posting (while watching the live feed of the race, he was claiming to know you and some other guy's that were running this past saturday night)...The Losi 4wd sct seemed to do especially well against the field while beating up the guys running ofna's sct's convincingly!!What other trucks's were running in that class???!If im not mistaken and you were running the new losi 4wd sct than I must say I am excited.....If that was any indication of what this vehicle has to offer than this platform should own the class!!By the way, they also were showing a live feed of the young Mr. Evans running his new losi 22 and basically owning and winning out the 2wd buggy class!!I must be clear as I am assuming those were the new Losi 4wd sct's you and casper were wheeling??Plz confirm??If so, Losi is making some waves!!

Yes we were both running the XXX-SCT in Pro2 and the Ten-SCTE in Pro4. I got very little practice that night and was trying an all new setup they have been working on so need a little more time on it. Truck was good though. I think I like the direction they went but still need a little more tweaking and wheel time to get used to it. Ryan has been dominating 4X4 lately. He can really wheel that thing. It is so easy to drive. We have had some good battles lately in Pro 2 though. It has been fun playing with these new Losi SC's. Can't wait to get my hands on the 22.
Casper is offline  
Old 02-08-2011, 03:39 PM
  #810  
Tech Elite
iTrader: (13)
 
Join Date: May 2006
Posts: 3,553
Trader Rating: 13 (100%+)
Default

We keep getting the trucks faster and faster as we work on them and have more of us running them now, which has been great to work with the team. We are also testing some new parts which all will enjoy. And it was really good to hear they will be docked on monday and should be ready to go by the following week.
hacker07 is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.