Losi 1/10 TEN-SCTE ARR 4x4 Short Course Truck Thread
#4246
Cactus Classic second A-main:
The 2011 25th Annual Cactus Classic Presented by Scottsdale RC Speedway
Position Driver Name Car # Laps Race Time Fast Lap Behind Qualifier #
1 Jorn Neumann 5 13 5:07.020 23.997 5
2 Mike Truhe 2 13 5:08.509 24.614 1.489 2
3 Hupo Honigl 4 13 5:16.345 24.587 7.836 4
4 Ryan Maifield 1 13 5:18.124 23.965 1.779 1
5 Kevin Gahan 6 12 5:06.151 25.591 6
6 Casey Peck 8 12 5:11.260 25.201 5.109 8
7 Adam Skelding 7 12 5:14.842 25.635 3.582 7
8 Billy Fischer 3 8 3:09.704 24.581 3
9 Tommy Hinz 9 8 3:33.092 26.678 23.388 9998
10 George Hammel 10 7 3:15.070 28.058 14
The 2011 25th Annual Cactus Classic Presented by Scottsdale RC Speedway
Position Driver Name Car # Laps Race Time Fast Lap Behind Qualifier #
1 Jorn Neumann 5 13 5:07.020 23.997 5
2 Mike Truhe 2 13 5:08.509 24.614 1.489 2
3 Hupo Honigl 4 13 5:16.345 24.587 7.836 4
4 Ryan Maifield 1 13 5:18.124 23.965 1.779 1
5 Kevin Gahan 6 12 5:06.151 25.591 6
6 Casey Peck 8 12 5:11.260 25.201 5.109 8
7 Adam Skelding 7 12 5:14.842 25.635 3.582 7
8 Billy Fischer 3 8 3:09.704 24.581 3
9 Tommy Hinz 9 8 3:33.092 26.678 23.388 9998
10 George Hammel 10 7 3:15.070 28.058 14
23.965 both times! Thats insane.
#4248
Tech Addict
iTrader: (12)
Does your ESC have a "current limiter" in it's setup??
On the Tekin RX8 you can adjust the "current limiter" to 90% from the default "off". This way your ESC isn't pushing all the juice to your motor. I was overheating like crazy with my Tekin SC4x 4.5T until I did that. I ran a (2) 5 minute heats and (1) 7 min main and temps coming off the track were at 140 degrees. I was geared at 14/40.
On the Tekin RX8 you can adjust the "current limiter" to 90% from the default "off". This way your ESC isn't pushing all the juice to your motor. I was overheating like crazy with my Tekin SC4x 4.5T until I did that. I ran a (2) 5 minute heats and (1) 7 min main and temps coming off the track were at 140 degrees. I was geared at 14/40.
i dont know what im gonna do. i am thinking about getting a mmp and running the same motor but on 3s.
#4249
Here is my SCTE what do you guys think?
#4250
^ pretty cool. How'd you paint it? can? airbrush?
#4251
#4253
#4254
#4260
Tech Rookie
help plz
ok so was running a mamba max proand a 4.5 novak 550 can with every type of pinon ranging from 11-14 got hot very quick, gave the motor and ran it with an lrp8( an 1/8 scale sc) and was out there for 30 minutes are so and only got to about 140. so now i run a tekin 4.5 550can still gets pretty hot i now have a two fans on the motor and i can manage to make a 5 minute rce and be ok but not completely happy so is it the 1/8 scake sc that is keeping the heat down or what, can they just handle more then the 1/10 scale sc , let me know thank you