Losi 1/10 TEN-SCTE ARR 4x4 Short Course Truck Thread
#3436
Tech Regular
iTrader: (12)
I just got off the phone with Horizon..there is a 2 hr wait to talk to them they will call you back it just takes a while. They are sending me 3 complete diff kits but they are on backorder until june. Its not very hard to make up new pins..I made a set at the track out of a hex driver that was in my toolbox. It took about 20 minutes with a dremel. Im thinkin the ones I made will last a while.
I tried the call back option this morning and never got a call back. I also tried the email route, no replies since Thursday.
#3438
i dont know why everyone is worryed about weight anyways. go to your track and look and see how many losi ten-t-scte there are at your track.
they all have the same weight.
then after the qulifiers look at the main line up and see how many losi trucks are in front of the jammin, ofna, and slash.
a week after this truck came out there was an A and B main in 4x4 SCT at my track the A main was all losi trucks the B was slash, jammin and ofna
not being a smart a$$ im just saying weight of this truck is an advantage
they all have the same weight.
then after the qulifiers look at the main line up and see how many losi trucks are in front of the jammin, ofna, and slash.
a week after this truck came out there was an A and B main in 4x4 SCT at my track the A main was all losi trucks the B was slash, jammin and ofna
not being a smart a$$ im just saying weight of this truck is an advantage
#3439
Tech Regular
iTrader: (12)
Ok, just got a call back from Horizon Hobby tech support, the guy's name was Cody and he was super nice. Got all my info and didn't know when they'll get the pins but he said he'll call me and let me know. He sounded like he's been doing some overtime, somebody needs to give him a big bonus check
#3440
to everyone that is having pin problems are you running the stock grease or you change to oils?
#3441
Just bought the piston pack. How do you fill and bleed the oil with no hole in the shock cap ?
#3443
#3444
http://www.youtube.com/watch?v=HNJy7...eature=related
#3445
#3446
Tech Initiate
finally got my motor ,ESC and servo today. I got the Spektrum S6040. Anyone running this servo? How's it working? I can always buy something else and use this one for my 22 buggy when it comes. Just wondering if 167 in lbs is enough torque? What are the Losi team running?
#3448
Tech Rookie
iTrader: (1)
Well i just got back from the psycho nitro blast in georgia! I have to say this was a REAL test for my new scte! I have had only 4 packs ran through the truck prior to this race. With practice starting on thursday the track was smooth and the truck was fast. After 24 hours of 1/8 running on the track it was horrible! Im running the rx8 4.5 scx4 combo and with the 15/40 gear at 10% timing in the speed control max amps 6500 150c race edition pack my temps where 154-162. This was my first big race and only the 2nd time driving 4wd sc I qualified 5th in the a-main. With Adam Drake giving me some setup help And a tire change I finished 3rd in both amains for an overall 3rd! Jeremy koortz was the winner! There were alot of good drivers in this class including a factory traxas driver! So for anyone waiting on the other truck to come out be carefull! This truck will be hard to beat!!! And also I had one one broken part all weekend thats pretty good for as rough as this track was! Plus the 40' triple that tossed the trucks upwards to 20' high I think losi has a winner! A special thanks to Adam again for stopping what he was doing just to help me!
#3449