Losi 1/10 TEN-SCTE ARR 4x4 Short Course Truck Thread
Tech Addict
iTrader: (8)
But actually I am looking for whether it is possible to just buy the pin itself, or whether there is a spec for the pin.
Thanks!
Tech Master
iTrader: (42)
Tech Regular
iTrader: (7)
Hey guys, I have a SC10 4x4 and am thinking about giving the losi a try. Will the jconcepts hazard wheels work on the losi? I have a lot of tires mounted and would hate to have to buy all new tires and wheels. Thanks for the help.
Tech Master
iTrader: (49)
Would make the wheels stick out the body, but they will work....
Tech Elite
iTrader: (27)
Tech Elite
iTrader: (27)
You can check the local tool shop for some 2mm drill blanks and the cut them to size.
Tech Regular
iTrader: (9)
To install it you take the stock brace out, then put the smaller of the two pivot balls between the two pieces of plastic on the diff housing, if you look at the bottom of the chassis there is a counter sunk hole right next to one of the nitro mounts, put the screw threw it and the bigger of the two pivot balls at the same time. Then grab a nut driver or a pair of pliers and screw the black nut that it comes with on to the screw.
Tech Regular
iTrader: (9)
Tech Master
iTrader: (40)
Anyone using viper copperhead with 5150 have a good set up with pro guage. Combo just doesnt have what my rx8 n pro 4 4000 had (sent in for repairs)
Thanks alot
Thanks alot
Tech Regular
iTrader: (9)
nitro
What do you guys think a brand new losi scte chassis is worth with a full nitro setup on it.. motor broken in and nearly no use.
Motor, pipe, clutch, bell, tank w/hoses, filter, center diff w/ brakes complete, nitro rx tray, losb0818 throttle servo, losb0819 steering servo (see pic all looks near new)
also going to sell a losi mtx pro radio maybe i'll post in sale forum shortly.
Swap on the front/rear clips and bingo nitro scte :P
Motor, pipe, clutch, bell, tank w/hoses, filter, center diff w/ brakes complete, nitro rx tray, losb0818 throttle servo, losb0819 steering servo (see pic all looks near new)
also going to sell a losi mtx pro radio maybe i'll post in sale forum shortly.
Swap on the front/rear clips and bingo nitro scte :P
Tech Elite
iTrader: (110)
Can I buy just the shock bladders or do I have to buy a whole rebuild kit? Are there any other bladders that will work? I cut mine emuldion style if that makes a difference.
Tech Addict
iTrader: (8)
TLTuning kit manual
Can someone scan aND SEND A copy of their TLR TUNING KIT MANUALS TO ME. PLEAASE I can't find these. I know it was posted here before but not sure how to search for it. I think hacker07 may have posted it. But I can't Find it
Last edited by Josey Wales; 04-02-2012 at 01:09 AM. Reason: Nono
Tech Master
iTrader: (9)
I personally have seen several of them get fried. I have a friend that used to run their 1/10th motors in his B4.1 and B44.1 and he went through like 3 of them. I've seen a certain track owner fry his 1/8th scale novak motor and I have a friend that runs a Hyper TT and I've seen him go through at least 3 if not more of the Ballistic 550 can motors. Needless to say, I'd never step foot any where near a Novak motor or esc anytime soon. The sad thing is that they used to be hands down the best ESC's on the market a long time ago. I guess they just rested on their laurels and watched the competition get better and better and eventually they overtook Novak. I've met Bob Novak a couple of times, he occasionally comes out to OCRC, seems like a good enough guy. But being a nice guy doesn't make you have good electronics and right now I sincerely believe many of Novak's motors and esc's are subpar. Trust me, I'd like to see the Big Orange come back up. It would be great for Novak, it would be great for us as consumers as well.
Tech Master
iTrader: (11)
Any idea on availability of the TLR Ti-Coated Hinge Pins? Of course they are out of stock everywhere I have checked.
First race weekend out with it and ripped a rear hinge pin right thru the Adjustable Rear Toe Plate like so many others.
Are there any other hinge pins out there that work, or are there ones I can cut to length?
Does anyone know how long the Ti-Coated Ones are? (TLR6080)
First race weekend out with it and ripped a rear hinge pin right thru the Adjustable Rear Toe Plate like so many others.
Are there any other hinge pins out there that work, or are there ones I can cut to length?
Does anyone know how long the Ti-Coated Ones are? (TLR6080)