9LikesLosi 1/10 TEN-SCTE ARR 4x4 Short Course Truck Thread
10-08-2011, 09:31 AM
Tech Apprentice
Originally Posted by BmainStar
Nitroalm all I can say is people running your chassis are very passionate about your product!Hope to have one soon for my 2nd truck and am glad there is choices!Its the chassis war thing that makes me laugh!!
10-08-2011, 09:33 AM
Originally Posted by SaladFork
Fun day at the track, my SCTe and R52 and R45 did great, however we need some bigger tracks in my area (or less rain). We had some smash laps, was fun to watch. 
| + YouTube Video | |
10-08-2011, 10:40 AM
Hi,
Just to be sure, the droop stop screws for the TLR chassis are similar to the 8ight ones (LOSA6253)?
I did not get any with the chassis, is this normal?
Cheers
Just to be sure, the droop stop screws for the TLR chassis are similar to the 8ight ones (LOSA6253)?
I did not get any with the chassis, is this normal?
Cheers
10-08-2011, 11:01 AM
just got my new shock caps with the bleeder whole in them. im a little confused one which video to go by to build emulsion shocks...do i fill the shock full of fluid to the rim, put the cap on then loosen just a little bit, push the shock shaft up to bleed out excess fluid then tighten the cap on?
10-08-2011, 11:03 AM
I won a set of 4 SC10 4x4 shocks from ebay for fairly cheap and was wondering what springs should I use. I bought the Factory Team front/rear spring kit for them. Also got the shock standoffs and bushings to complete it. The reason for this is because the truck I got is missing the 2 front shocks. And the cheapest I could find them at was more than what I paid for the set of 4 associated shocks. They are a couple mm's long which will be no big deal. Also what's a good starting point for oil.
10-08-2011, 11:10 AM
4-40 droop chasi screws
Originally Posted by sylv456
Hi,
Just to be sure, the droop stop screws for the TLR chassis are similar to the 8ight ones (LOSA6253)?
I did not get any with the chassis, is this normal?
Cheers
Just to be sure, the droop stop screws for the TLR chassis are similar to the 8ight ones (LOSA6253)?
I did not get any with the chassis, is this normal?
Cheers
10-08-2011, 11:11 AM
Originally Posted by Divey
I won a set of 4 SC10 4x4 shocks from ebay for fairly cheap and was wondering what springs should I use. I bought the Factory Team front/rear spring kit for them. Also got the shock standoffs and bushings to complete it. The reason for this is because the truck I got is missing the 2 front shocks. And the cheapest I could find them at was more than what I paid for the set of 4 associated shocks. They are a couple mm's long which will be no big deal. Also what's a good starting point for oil.
10-08-2011, 11:29 AM
I tried searching, but what is the ten scte internal gear ratio?
10-08-2011, 12:12 PM
Originally Posted by rx7ttlm
I tried searching, but what is the ten scte internal gear ratio?
10-08-2011, 12:31 PM
Originally Posted by Buzz3
Smash laps? I thought you were just showing off the new chassis.
10-08-2011, 12:37 PM
Originally Posted by SaladFork
They didn't like I was using a SC10 body on a Losi.
10-08-2011, 12:53 PM
Why didn't you just PM him this? Do you need attention that bad? Pick up a book on grammar if you really want to appear to be the smarter individual. He made a good point without being a jerk I thought. Twice as long as what?
Now on to my question. How much faster is the Tekin 4600 verses the 4000? I have it (4000) and it's pretty crazy. Is it just more efficient with the power?
I did Salad but why don't you get after porkchop for posting that stupid rant?
Now on to my question. How much faster is the Tekin 4600 verses the 4000? I have it (4000) and it's pretty crazy. Is it just more efficient with the power?
I did Salad but why don't you get after porkchop for posting that stupid rant?
Last edited by big chris; 10-08-2011 at 01:34 PM.
10-08-2011, 01:05 PM
Where can I order the TLR kit that's the newest one where the shock caps have the bleeder screw so they can be ran emulsion style??? If someone could link me that would be great.
10-08-2011, 01:08 PM
Originally Posted by big chris
Now on to my question. How much faster is the Tekin 4600 verses the 4000? I have it (4000) and it's pretty crazy. Is it just more efficient with the power?
10-08-2011, 01:16 PM
Originally Posted by 10sctrel0v3r
just got my new shock caps with the bleeder whole in them. im a little confused one which video to go by to build emulsion shocks...do i fill the shock full of fluid to the rim, put the cap on then loosen just a little bit, push the shock shaft up to bleed out excess fluid then tighten the cap on?
