Hyper TT 4wd 1/10th Truggy Thread
#107
Tech Initiate
iTrader: (3)
Running 5 minute qualifiers & 7 minute mains the 4.5 HV is temping in the 125-135degree range (60-70 degrees outside this time of year). Thats with a 14 tooth pinion, & NO heatsink. Not sure what the MMP is temping at, I don't usually check the esc. I do know that the fan is always off, & if I'm not mistaken it doesn't turn on untill the speedo reaches 150 degrees.
#109
Tech Master
iTrader: (83)
HyperTT SNR CF towers and center plate
SNR does it again. Nice work Steve.
Graphite Front Shock Tower, Hyper 10TT [SNR21008]
Graphite Rear Shock Tower, Hyper 10TT [SNR21020]
Graphite Lower Center Plate, Hyper 10TT [SNR21241]
Now availiable at Nitrohouse.com or PM SNR
http://www.nitrohouse.com/catalog/in...09_473&&page=1
Graphite Front Shock Tower, Hyper 10TT [SNR21008]
Graphite Rear Shock Tower, Hyper 10TT [SNR21020]
Graphite Lower Center Plate, Hyper 10TT [SNR21241]
Now availiable at Nitrohouse.com or PM SNR
http://www.nitrohouse.com/catalog/in...09_473&&page=1
#111
#112
Tech Champion
iTrader: (107)
There is a mini truggy class at WC, but the Losi Ten T will not be allowed. I spoke with Danny just now and he did not say the Ten T is allowed. He stated you asked about a different kit. I have discussed this before and the Ten T is only allowed in the SC class with a SC body.
Last edited by lbckevin; 10-11-2010 at 05:02 PM.
#113
Tech Champion
iTrader: (94)
Teeforb...
There is a mini truggy class at WC, but the Losi Ten T will not be allowed. I spoke with Danny just now and he did not say the Ten T is allowed. He stated you asked about a different kit. I have discussed this before and the Ten T is only allowed in the SC class with a SC body.
There is a mini truggy class at WC, but the Losi Ten T will not be allowed. I spoke with Danny just now and he did not say the Ten T is allowed. He stated you asked about a different kit. I have discussed this before and the Ten T is only allowed in the SC class with a SC body.
#115
R/C Tech Elite Member
iTrader: (112)
SNR does it again. Nice work Steve.
Graphite Front Shock Tower, Hyper 10TT [SNR21008]
Graphite Rear Shock Tower, Hyper 10TT [SNR21020]
Graphite Lower Center Plate, Hyper 10TT [SNR21241]
Now availiable at Nitrohouse.com or PM SNR
http://www.nitrohouse.com/catalog/in...09_473&&page=1
Graphite Front Shock Tower, Hyper 10TT [SNR21008]
Graphite Rear Shock Tower, Hyper 10TT [SNR21020]
Graphite Lower Center Plate, Hyper 10TT [SNR21241]
Now availiable at Nitrohouse.com or PM SNR
http://www.nitrohouse.com/catalog/in...09_473&&page=1
Just a quick question for the guys who have theirs already, how do the shocks compare to the SCRT-10 shocks? I have a set layin around and wondered if this would work? Thanks! Can't wait to get mine ordered!