Hyper TT 4wd 1/10th Truggy Thread
#3901
I was thinking about selling mine..lemme know. I'll PM you..
#3902
i have and hyper tt for sale one fun 3 or 4 times and a steeering rack up great look for 120 i pay shipping if u want ready to run 280 mamba pro and the mamba 9000 plz pm thx
#3903
Tech Rookie
i just picked one of these up and wanna do some casual trail riding type driving of my 10tt minor jumps trails dirt med jumps i have a havok pro esc and a novak 6.5 ballistic 540 motor and i cant get it to stop gettinyg hot???? what am i doing wrong and can anyone recomend some upgrades for my trail riding has aluminum top plate and steering rack
#3905
Tech Rookie
gear
ive had it geared with i guess the stock blue spur gear and i tried a 13t pinion and it got hot enough to burn my fingerpriints off lol the esc the motor was only luke warm
Last edited by rocdriftking; 03-21-2013 at 07:31 PM.
#3906
If your esc and motor is only lukewarm , then what else is hot ? Your battery ?
#3907
Tech Rookie
the speed control is getting very very hot have tried a 15t and a 13t pinion i ju st bought a 12t and my lhs to see if that will cool down the speed control i just feel like im missing something
#3908
Tech Rookie
well
well i really need some help just smoked a brand new 6.5 ballistic motor and am still not sure about my speed control.... so here goes as this is my basher truck does anyone know if i should be running a 550 motor or what im not intrested in frying anymore electronics cause of bad gear ratio please help!!!
#3910
Tech Rookie
iTrader: (1)
Hey i bought on of this 3 weeks ago and it have a mmp 5700kv, run it on 2s, geared 15/52 (not sure abut the spur)
No heat issues, but i want to try it on 3s, will i have heat problems?
I have problems with my front cvd's, they wear out really quickly, what should i do?
Also, for my mmp esc, i broke a fan wire, where can i find a connector for it?
Thanks!!
No heat issues, but i want to try it on 3s, will i have heat problems?
I have problems with my front cvd's, they wear out really quickly, what should i do?
Also, for my mmp esc, i broke a fan wire, where can i find a connector for it?
Thanks!!
#3911
Tech Rookie
iTrader: (1)
Hey i bought on of this 3 weeks ago and it have a mmp 5700kv, run it on 2s, geared 15/52 (not sure abut the spur)
No heat issues, but i want to try it on 3s, will i have heat problems?
I have problems with my front cvd's, they wear out really quickly, what should i do?
Also, for my mmp esc, i broke a fan wire, where can i find a connector for it?
Thanks!!
No heat issues, but i want to try it on 3s, will i have heat problems?
I have problems with my front cvd's, they wear out really quickly, what should i do?
Also, for my mmp esc, i broke a fan wire, where can i find a connector for it?
Thanks!!
#3913
Tech Regular
iTrader: (17)
Thinking of buying one of these, look pretty cool. I have a Ofna Hobao Hyper 8.5 and it is as tough as a tank.
Just want to know if anyone here bashes them and if they would recommend it for bashing?
Also i was going to drop the combo out of a Team Associated 4x4 sc10 into it (Mainly because its cheap), has anyone else done this?
And what tires do you run if you bash?
Just want to know if anyone here bashes them and if they would recommend it for bashing?
Also i was going to drop the combo out of a Team Associated 4x4 sc10 into it (Mainly because its cheap), has anyone else done this?
And what tires do you run if you bash?
#3915
Tech Rookie
Just got myself a Mini Hyper ST which is supposed to be the same car but with a shorter main chassis.
Thinking about "converting" it to a Hyper TT and use a Traxxas Stampede body. Do i need anything other than the main chassis and center driveshafts?
ANything in general i should look over or upgrade?
Thanks in advance, Jonathan
Thinking about "converting" it to a Hyper TT and use a Traxxas Stampede body. Do i need anything other than the main chassis and center driveshafts?
ANything in general i should look over or upgrade?
Thanks in advance, Jonathan