JoeC

iTrader: (120)

I usually run tires with solid dish rims but at the track I run at the inside of rim seems to get caked up with dirt pretty good. I recently orderd some rulux rims and am going to try them next weekend at the Futaba Challange. I was wanting to get some opinions about these rims and maybe some pros and cons from those of you that use them. I run am MBX6 so they will also make it easier to change camber if needed.

racer1812

iTrader: (31)

I only run 1/10 scale but they seem to hold up really well, never had a lip crack or any other issue with them.

JoeC

iTrader: (120)

Thanks.

OG RC 10T

iTrader: (41)

Been using them for years in 10th and 8th. They are very strong.

kman16jr

iTrader: (56)

No problems here.they are awesome.I use them on my 1/8 buggy and truggy,along with my 1/10 4wd and 2wd and never had one crack or warp.

Harry Sachs

iTrader: (15)

I use them too. Good as any and look cool.

jag5508

iTrader: (15)

Just don't use the 1/10 when it's cold out . I used them one day on an indoor track over the winter and the cracked every where .The plastic gets very brittle in the cold weather .