8 cell 9.6V Duratrax 5000MaH Battery in my Slash or SC10
#1
Tech Apprentice
Thread Starter

Sorry for all the questions, I was wondering if I would be able to run a 8 cell 9.6V 5000MaH Duratrax NiMH battery in my bone stock slash (12T Titan) or my bone stock SC10 (Reedy 17T).
Would this burn the motors up or wreck the ESC? I read somewhere that the only time the motor and ESC would be getting the full 9.6V is at WOT, so if your WOT time is limited it shouldnt be a problem?
Thanks-
Would this burn the motors up or wreck the ESC? I read somewhere that the only time the motor and ESC would be getting the full 9.6V is at WOT, so if your WOT time is limited it shouldnt be a problem?
Thanks-
#3
Tech Adept

Should be ok in the slash as the XL-5 has a max voltage of 9.6v, not sure about the sc10 though
#4

Sorry for all the questions, I was wondering if I would be able to run a 8 cell 9.6V 5000MaH Duratrax NiMH battery in my bone stock slash (12T Titan) or my bone stock SC10 (Reedy 17T).
Would this burn the motors up or wreck the ESC? I read somewhere that the only time the motor and ESC would be getting the full 9.6V is at WOT, so if your WOT time is limited it shouldnt be a problem?
Thanks-
Would this burn the motors up or wreck the ESC? I read somewhere that the only time the motor and ESC would be getting the full 9.6V is at WOT, so if your WOT time is limited it shouldnt be a problem?
Thanks-
«
Previous Thread
|
Next Thread
»
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)